Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
749 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Engine and transmission dipsticks for checking oil level. This comprehensive set is compatible with a large selection of vehicles in the Mercedes range. Engines ranging from 1988 to 2005. Transmissions ranging from 1996 to 2006. The dipstick is a service tool, therefore must be removed after the fluid has been checked.
£61.40Price
£61.40Price
Designed to rotate crankshaft on MAN commercial vehicles via flywheel ring gear.
£61.40Price
Camshaft setting and flywheel locking tools to cover BMW M47/TU/T2 and M57/TU/T2 diesel engines used in BMW, Land Rover, MG/Rover and Vauxhall/Opel models. Supplied in storage case.
£87.75Price
Stretch belt fitting kit for Ford and Volvo. Time-saving tool designed for use when universal tools will not work due to the wider crankshaft pulley which restricts access. One part of the kit clips over the crankshaft pulley to guide the belt, the other part fits over the water pump pulley, and by using a 17mm socket, is simply rotated until the belt is located correctly on all the pulleys....
£72.57Price
Comprehensive timing tool kit for 2.0D, 2.2D and 2.4D Duratorq chain driven diesel engines fitted in Citroen, Fiat, Ford, Jaguar, Land Rover, LDV and Peugeot vehicles. Kit includes sprocket retaining plates for both early and later engines and access cover removal tools for injection pump removal/installation. Supplied in storage case with a warning tag.
£62.20Price
Suitable for setting and locking Alfa Romeo, Fiat and Lancia complete range of 1.6D, 1.9D, 2.0D JTD and Multijet engines as well as 2.4D 10v and 20v JTD. Kit contains flywheel holding tool to remove/install crankshaft pulley, crankshaft locking tool and camshaft setting tools. Supplied in storage case with instructions and a warning tag.
£62.20Price
Essential tool required when removing the cylinder head/camshafts on VAG Pumpe Duse and common rail diesel engines. Set comprises camshaft sprocket hub holding tool and hub remover.
£62.20Price
Suitable for timing belt replacement on the 1.4, 1.6, 1.8 and 2.0 engines fitted in Renault, Vauxhall/Opel and Dacia vehicles. These engines will require the use of a Camshaft Sprocket Holding Tool, to loosen the camshaft sprocket bolts. Kit features camshaft setting plate which avoids the camshaft position sensor on later 1.4 and 1.6 engines.
£62.20Price
Comprises camshaft setting tools and belt tensioner locking pins. Suitable for timing applications on all 1.4, 1.6 and 1.8 Twinport petrol engines with belt drive. Supplied in a storage case with instructions and a warning tag.
£62.20Price
Includes locking tools for 1.0, 1.2, 1.4 EcoTec/EcoFLEX (codes X and Z) chain engines. Also includes the timing disc position gauge for the timing sensor on the inlet camshaft. Supplied in storage case with instructions and a warning tag.
£62.20Price
£62.20Price
Professional low cost tool saves all the vehicle settings to prevent loss and expensive reprogramming not just for radio codes but for immobilisers, traction control, engine management and satellite navigation. Bright, easy-to-read LEDs for at-a-glance confirmation of connection. Can be used with any existing booster packs with a vehicle accessory power socket or even vehicle-to-vehicle.
£62.20Price
Essential tool for holding the flywheel when releasing and tightening the vibration damper central bolts on BMW M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 and Mini W17 diesel/petrol chain drive engines. The tool can also be used to hold the flywheel when removing the timing chain for cylinder head work.
£103.69Price
£64.03Price
Save time and money and take the guesswork out of your fault-finding and diagnosis. Allows interrogation of the vehicle’s ECU to determine the performance of essential emission-based information, to read and clear Diagnostic Trouble Codes (DTCs) and to obtain vital performance data from the vehicle’s engine and transmission (Petrol 2000 onwards and Diesel 2003 onwards).
£64.03Price
£96.51Price
Designed for both petrol and diesel vehicles, to retrieve excess fuel from fuel lines before maintenance. Eliminates the risk of fuel spills and damage to pipes if clamped. Supplied with quick release connectors, commonly found on PSA and Vauxhall/Opel vehicles, plus two universal connectors for older vehicles.
£96.51Price
Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. Windows and slots enable sockets to be fitted over wiring harness.
£66.04Price
£66.20Price
Suitable for testing for distortion on cylinder heads and engine blocks during engine overhauls and rebuilds. May be used with feeler gauges for high precision work. Made from Carbon Steel. Features peg hole for easy storage. Supplied with protective edging for when not in use.
£66.20Price
High precision auto-ranging multimeter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Features temperature measurement capability, max./data hold and auto-power-off function. Double moulded housing with soft grip case and large display for ease of use. Practical probe, lead storage and integral upright stand for use...
£66.20Price
American-style drop tester. Polarity protected cables - impossible to damage unit by incorrect connection. Load applied by internal switchgear - no sparking! Suitable for 6 and 12V batteries. Applies load across cells and measures output on meter. Accurate indication of battery voltage and faulty or short circuited cell.
£66.66Price
£66.98Price
Composite cased Xenon timing light with inductive impulse pick-up. 8000rpm Maximum. Measures timing advance range 0-60° BTDC. Supplied with 1.5m coiled 12V power lead, inductive coupler and operating instructions.
£66.98Price
Suitable for timing belt replacement on Vauxhall/Opel and Saab vehicles fitted with 1.9D CDTi/TiD/TTiD or 2.0D CDTi engines. Kit contains camshaft setting tools, crankshaft locking tool and tensioner pin. Supplied in storage case.
£67.38Price
£67.38Price
Suitable for VAG 1.2 6v, 1.2 12v, 1.4 and 1.6 16v twin cam petrol engines (97-14).
£67.38Price
£67.38Price
Ensures accurate measurement of belt tension. Clear increment and dual scale for ease of use. Tension chart guide is included. Suitable for belts of varying thickness.
£67.38Price
£67.54Price
Tests 6 and 12V batteries. Applies load across terminals and reads voltage performance. Also checks charging voltage. Fitted with moving-coil meter. Features a pistol grip handle for ease of use.
£67.54Price
£76.56Price
Fully adjustable robust tool for assisting in the successful separation of the engine crankcases to allow access to the crank shaft, connecting rods and other internal components. Suitable for use on a variety of motorcycle and ATV engines. Supplied in storage case.
£76.56Price
Designed to lock the fuel pump sprocket and timing chain into position while the pump is removed/replaced.
£69.46Price
£70.18Price
Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.
£70.18Price
Accurately measures the strength of battery fluid, screenwash and antifreeze by measuring the refractive index of light passing through the mixture. Suitable for synthetic antifreeze mixtures including long-life OAT (Organic Acid Technology) and G13. Temperature corrected prism ensures accuracy. Eyepiece with adjustable focus. Supplied with pipette and storage case.
£70.19Price
High precision clamp meter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Features non-contact AC voltage detection function while controls are laid out to enable use with one-hand. Includes data and maximum hold functions. Double moulded housing with soft grip case, large display for ease of use and 30mm clamp....
£70.19Price
£70.50Price
Designed to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjustable jaw spread and interchangeable pins.
£70.50Price
£71.79Price
Comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly over size, then fit a new drain plug and washer (supplied). Set is suitable for the most popular threads used on cars and light commercial vehicles. Supplied in storage case.
£71.79Price