For removing the heater element that can break off during glow plug removal. Saves time not having to remove the cylinder head. Works by drilling/tapping a thread into the broken element so the supplied glow plug adaptors can be used to extract. Supplied with seven drilling/tapping guides and five glow plug extraction adaptors with either a M8 or M10 thread.

Capless cooling system tester uses an inflatable bladder to seal the pressure head to the radiator or header tank. Bladder system can be used on both screw and bayonet fittings and seals 90% of cars and light commercial vehicles straight out of the box. Also suitable for motorcycles, off-road and marine applications. Supplied with a set of double end adaptors enabling testing of cooling system...

Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector. Suitable for testing cars and light commercial vehicles with direct or indirect injection. Pressure relief valve allows repeated on-vehicle tests. Includes 90° coupling adaptor for limited access applications. Supplied in storage case.

Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector. Ball joint allows hammer to be used in confined areas. Supplied in storage case.

Covers a wide range of Vauxhall/Opel and Chevrolet petrol engines. Includes the necessary tools for setting and locking the camshafts and crankshaft. Also includes the pins for locking the timing chain tensioner, locking tools for 1.0, 1.2, 1.4, 1.6 EcoTec/EcoFLEX (codes X and Z) chain engines, and the timing disc position gauge for the timing sensor on the inlet camshaft. Supplied in storage...

Suitable for setting and adjusting the timing on 1.6 and 2.0 BMW N43 petrol engines. Kit contains the necessary tools for aligning the Vanos units on the inlet and exhaust camshafts.

Designed to fit the new generation of Ford EcoBlue belt in oil diesel engines. Contains the special tooling essential for locking the engine in its timing position. Includes tools for fitting the timing belt onto the camshafts. Supplied in a storage case with warning tag and full instructions.

Comprehensive timing tool combination kit for 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.4, 2.5 diesel and petrol engines fitted to Audi, Seat, Skoda and VW vehicles. Includes Service Position Support Guides required for service applications on some VAG vehicles. Supplied in storage case.

Includes timing chain tensioner wedge to release the oil pressure from the hydraulic timing chain tensioner. A timing chain tensioner drift is provided to refit the blanking plug back into the crankcase after removing the chain tensioner. A T100 star bit is provided to remove the camshaft sprocket fixing bolts.

A comprehensive fuel priming set fitted with the latest male and female quick connectors found on Fiat, Ford, Land Rover, Mercedes, PSA, Renault, Rover and Vauxhall/Opel vehicles. Designed to work in conjunction with the low pressure fuel circuit, to reintroduce fuel back up to the fuel line after maintenance. Clear pipes allow visual detection of any air within the fuel system or being...

Suitable for Ford EcoBlue 2.0L engines. Easily extracts Ford EcoBlue diesel injectors in one piece so they can be refitted. The set includes a force screw, shoulder nut (with bearing), injector clamp, clamp bolt, flare nut, support bridge and bridge legs with nuts (x2). Equivalent to OEM 303-1706.

Traditional style cooling system pressure testing kit with an updated selection of adaptors to fit popular European and Japanese vehicles including Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Seat, Skoda, Suzuki, Toyota, Volvo, VW. Also includes non-specific adaptors for other...

High performance pistol grip borescope with 85mm colour TFT screen, waterproof probe pod with IP67 rating. Features video record/playback, still images and stream live video via the AV out connection. Videos and images are stored on a 4GB micro SD card (supplied) allowing up to 4.5 hours of video and 10,000 images, which can be transferred to a PC via the USB connection. Also features digital...

Cooling system pressure testing kit, designed for commercial vehicles. Pressure pump with gauge quickly identifies faulty gaskets, radiators, weeping pipes and other causes of coolant loss.

Fits the new generation of BMW modular petrol engines. Contains the tools required to set and lock the engine and for valve timing checking and adjusting. Supplied in a storage case with instructions and a warning tag.

Suitable for timing 1.4, 1.6 16v Valvetronic direct injection, chain drive petrol engines, fitted in BMW Mini, Citroen and Peugeot vehicles. Supplied in storage case with comprehensive instructions.

Used for timing 2.2/2.3/3.0D belt and chain diesel drive engines, including the later chain in head versions, usually found in light commercial vehicles. Features a water sensor installation socket, crankshaft turning tool, timing cover centring plate, oil pump setting plate as well as camshaft and crankshaft locking tools. These engines are also found in the Ford Transit. Supplied in storage...

Timing chain splitting and fitting tool kit. Enables timing chain replacement with the minimum of engine dismantling. Suitable for Mercedes chain drive engines, and some Chrysler and Jeep applications. The kit includes tools to split the chain and also the temporary chain links required to fit the new chain. Supplied in a storage case with instructions.

Portable articulated borescope supplied with 70mm TFT colour display. Mini waterproof (IP67) camera with integral light (Ø6mm) mounted on 800mm flexible 2-way articulated probe. Using an attached dial, the camera head angle can be changed by up to 350˚ without having to remove camera from inspection area. Using 8GB micro SD card (supplied), up to 9hrs of video and 20,000 still images can be...

Suitable for the new 2.0 Ingenium chain drive petrol and diesel engines from JLR. Contains all the essential tools required to lock the engines into their timed position. Includes the special tools required to set the camshaft adjusters. Supplied in a storage case with instructions and a warning tag.

Contents include Camshaft Alignment Tools, Crankshaft Alignment Tool and a Flywheel Locking Tool. Heavy-Duty Camshaft Holding Tools ensure accurate positioning. Supplied in a storage case with full instructions.

Suitable for the latest VAG 1.2, 1.4 TSi belt drive petrol engines including the 1.4 TSi ACT. Contains essential tools for camshaft locking, crankshaft replacement and timing belt replacement. Supplied in storage case.

Heavy-duty pressure test kit. Aluminium radiator header tank caps are colour-coded for ease of use and have quick release fittings. Suitable for a wide range of vehicle applications. Locate system leaks from: • Head gasket • Header tank • Radiator and heater cores • Water pump, plugs, hoses and housings Heavy-duty pump unit features smooth action and large, easy-to-read, scale. Long hose aids...

Traditional style cooling system pressure testing kit. Features five new adaptors increasing the vehicle applications. Suitable for Alfa, Audi, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Kia, Lancia, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Seat, Skoda, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW. Also includes non-specific adaptors for other makes....

Suitable for the removal of Bosch, Delphi, Denso, Siemens and Pumpe Duse diesel injectors. Set includes keys and deep open profile sockets, used to dismantle injectors, plus a selection of adaptors for attaching the slide hammer securely to the body of the injector. Ball joint and choice of two sizes of slide hammer allow access in confined areas if required. Supplied in storage case.