Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
614 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Contains the essential tools required to maintain engine timing if the vibration damper has to be removed. Supplied in a storage case with full instructions.
£167.53Price
£167.53Price
Comprehensive kit of hoses, adaptors and fittings for testing the pressure on modern petrol fuel injection systems. Fitted with quick couplings and safety valve to prevent inadvertent discharge of fuel under pressure. Supplied with Ø92mm single high pressure gauge with rubber bumper, reading 0-140psi and 0-10bar. Pressure release valve fitted with long drain hose allows safe recovery of fuel....
£167.53Price
£167.53Price
Designed to counter-hold water pump, camshaft, crankshaft, oil pump, pulleys and sprockets when loosening and tightening the securing bolts. Adaptors included: Ø4.8mm, Ø6mm, 15mm x 6mm square, 15mm x 12mm square, 13mm x 17mm cup, 16mm x 20mm cup, M10, M12 spline, 6mm/10mm/12mm stepped adaptors, adaptor plate and handle. Supplied in storage case.
£167.53Price
Covers the new generation 3 and 4-cylinder common rail diesel engines. Includes the tools required for setting the camshaft drive gears within the cylinder head.
£167.53Price
Covers the range of VAG 1.0 petrol engines. Includes the tools required to hold the camshaft sprockets and to adjust the timing belt tensioner.
£167.53Price
£171.12Price
Used in conjunction with a press, this unit crushes filters up to Ø115mm and removes most of the oil and sludge, which drains into a suitable container (not included). Crushing filters minimizes the cost of disposal of hazardous waste by volume. Supplied with ram extension to allow 2-stage crushing of large filters without repositioning press table. Suitable for Ø38mm(1.5") press rams. Optional...
£171.12Price
Covers a wide range of BMW and Mini Chain Drive Petrol Engines. Includes the necessary tools for setting and locking the camshafts and crankshaft, and a tool for setting the timing chain pre-tension.
£178.70Price
£179.90Price
Cast puller yoke with forged separator. 10 Tonne Hydraulic ram interchangeable with other units in the series. Supplied with Ø75-105mm bearing separator. Maximum puller depth 420mm. Supplied in metal case.
£179.90Price
£186.70Price
Designed to remove damaged/broken glow plugs from cylinder heads. Suitable for glow plugs with an M8 x 1mm and M10 x 1mm thread. Set includes all required adaptors for drilling, centring and pulling for the safe removal of glow plug. Supplied in storage case.
£186.70Price
£186.92Price
Fast and effective remedy for damage to cylinder head glow plug threads. Set includes tools for the precise insertion of threaded inserts into the head and features a unique tap guide system to ensure their correct alignment. Includes four sizes of threaded adaptors suitable for common sizes of glow plug. Supplied in storage case.
£186.92Price
£188.60Price
For extension kit see XXX
Model No. - Description
RWSBKIT - 25m Red/White Post & Chain Kit
HVSA4 - 200 x 300mm High Voltage Warning Sign
HYBRIDSIGN - Hybrid/Electric Vehicle Warning Sign (x2)
HYBRIDTAG - Hybrid/Electric Vehicle Keyring Warning Tag
Ideal for technicians working on modern hybrid and electrical vehicles.
£188.60Price
Suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Width and length adjustable. Engine stand's frame elongates to allow adjustment for length between mounting points.
£238.55Price
Essential tool for timing chain work on Mercedes 1.7D, 2.1D, 2.2D, 2.7D, 3.0D, 3.2D, 3.9D and 4.0D CDi diesel engines. The link separating tool and the link assembly tool allow for quick and easy separation and assembly of the timing chain. May also be used on some Chrysler/Jeep 2.2D, 2.7D and 3.0D CRD diesel engines.
£189.88Price
Timing tool kit that covers a wide range of VAG petrol engines. Includes the necessary tools for setting the engine at TDC, the locking tools for both types of timing chain tensioner and a tool for the oil pump chain tensioner. Also includes the tool essential for removing the camshaft control valve.
£189.88Price
£191.31Price
Forged steel 2-way yoke allows twin or triple leg pulls. 10 Tonne Hydraulic power unit with tommy bar. Suitable for pulling hubs, flanges, gears and bearings. Three 3-position puller arms and three sets of extension plates, supplied in storage case. Hydraulic ram interchangeable with others in series.
£191.31Price
£191.47Price
Used to detect the pulse from the fuel pipes of diesel fuel injectors. Works on most direct injection diesel engines fitted with 6mm(1/4") to 10mm(3/8") external fuel pipes. Suitable for use with most timing lights, engine analysers and multimeters that have an inductive pick-up.
£191.47Price
£200.97Price
Drop-forged Chrome Vanadium steel puller arms with locking/gripping feature. Set includes three sets of 100mm triple leg pullers with locking features which clamp the jaws firmly inside/outside the gear or bearing. Includes 1.2kg slide hammer. Supplied in storage case.
£200.97Price
Essential tools for timing belt replacement on Renault/Nissan 1.5D, 1.9D, 2.2D and 2.5D dCi diesel engines. Covers engine codes K9K, F9Q, G9T, G9U. These engines are also fitted in Vauxhall/Opel, Suzuki, Mitsubishi and Dacia models. Kit includes crankshaft locking pins, belt tensioner tools and camshaft setting plates.
£201.05Price
Suitable for the latest generation VAG TSi petrol engines. Contains essential tools for camshaft and crankshaft locking. Supplied in storage case with full instructions and a warning tag.
£201.05Price
Suitable for chain drive Ford EcoBoost engines. Comprehensive kit which includes VVT locking tools and a multi-spline camshaft socket. Supplied in a storage case with instructions and a warning tag.
£201.05Price
£205.36Price
For removing the heater element that can break off during glow plug removal. Saves time not having to remove the cylinder head. Works by drilling/tapping a thread into the broken element so the supplied glow plug adaptors can be used to extract. Supplied with seven drilling/tapping guides and five glow plug extraction adaptors with either a M8 or M10 thread.
£205.36Price
£215.43Price
Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector. Suitable for testing cars and light commercial vehicles with direct or indirect injection. Pressure relief valve allows repeated on-vehicle tests. Includes 90° coupling adaptor for limited access applications. Supplied in storage case.
£215.43Price
£215.43Price
Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes keys and deep open profile sockets, used to dismantle injectors, plus adaptors for attaching the slide hammer securely to the body of the injector. Ball joint allows hammer to be used in confined areas. Supplied in storage case.
£215.43Price
Covers a wide range of Vauxhall/Opel and Chevrolet petrol engines. Includes the necessary tools for setting and locking the camshafts and crankshaft. Also includes the pins for locking the timing chain tensioner, locking tools for 1.0, 1.2, 1.4, 1.6 EcoTec/EcoFLEX (codes X and Z) chain engines, and the timing disc position gauge for the timing sensor on the inlet camshaft. Supplied in storage...
£217.81Price
£219.24Price
Heavy-duty triple leg 10 Tonne hydraulic puller. Suitable for pulling hubs, flanges, gears and bearings. Supplied with three 2-position puller legs and storage case.
£219.24Price
Suitable for setting and adjusting the timing on 1.6 and 2.0 BMW N43 petrol engines. Kit contains the necessary tools for aligning the Vanos units on the inlet and exhaust camshafts.
£223.39Price
Designed to fit the new generation of Ford EcoBlue belt in oil diesel engines. Contains the special tooling essential for locking the engine in its timing position. Includes tools for fitting the timing belt onto the camshafts. Supplied in a storage case with warning tag and full instructions.
£223.39Price
Comprehensive timing tool combination kit for 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.4, 2.5 diesel and petrol engines fitted to Audi, Seat, Skoda and VW vehicles. Includes Service Position Support Guides required for service applications on some VAG vehicles. Supplied in storage case.
£223.39Price
Includes timing chain tensioner wedge to release the oil pressure from the hydraulic timing chain tensioner. A timing chain tensioner drift is provided to refit the blanking plug back into the crankcase after removing the chain tensioner. A T100 star bit is provided to remove the camshaft sprocket fixing bolts.
£223.39Price
£228.18Price
A comprehensive fuel priming set fitted with the latest male and female quick connectors found on Fiat, Ford, Land Rover, Mercedes, PSA, Renault, Rover and Vauxhall/Opel vehicles. Designed to work in conjunction with the low pressure fuel circuit, to reintroduce fuel back up to the fuel line after maintenance. Clear pipes allow visual detection of any air within the fuel system or being...
£228.18Price