Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
771 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Suitable for setting and locking popular BMW petrol engines. Kit comprises camshaft locking tools and flywheel locking pin.
£77.76Price
£78.48Price
Durable case and integral stand suitable for the toughest workshop conditions. Large, high-contrast LCD display with 18mm high digital read-out and analogue bar graph. Includes auto-ranging, data-hold, auto-polarity, auto-power-off and low battery display functions. Bar graph simplifies lambda sensor testing. Supplied with capped test probes and K-type thermocouple.
£78.48Price
Detects energy emissions in the infrared spectrum and displays the temperature on an 18mm LCD back-lit display. Twin-spot laser guides user to the unit’s optimum targeting distance - when the two laser dots merge into one, unit is reading a 13mm disc of temperature. Features data-hold and auto-power-off. Temperature can be shown in either °C or °F. Powered by 9V battery (supplied).
£78.95Price
High precision auto-ranging multimeter. Conforms to EN 61010-1 CATIII 600V safety requirements for electrical equipment for measurement, control and laboratory use. Features temperature measurement capability, max./data-hold, and auto-power-off function. Double moulded housing with soft grip case and large display for ease of use. Practical probe and lead storage and integral upright stand for...
£78.97Price
£81.59Price
Comprehensive set of tools for release and removal of in-car entertainment units on popular vehicles. Supplied in storage case with stamped application list for simple selection.
£81.59Price
£81.59Price
Suitable for Land Rover Defender (1999 - 2007), Discovery II (1998- 2005). TD5 Diesel engine codes 10P, 15P, 16P. Includes a slide hammer.
£81.59Price
£82.16Price
Enables easy removal of freewheel alternator pulley, either on or off the vehicle. Allows alternator shaft to be held while the pulley retainer is removed. Incorporates a complete range of combination TRX-Star*, spline and hex adaptors to fit most alternators. Supplied in storage case.
£82.16Price
£82.31Price
Extracts petrol injectors easily without damaging the injector or head. Includes slide hammer and specially designed injector claw. Equivalent to OEM 310-206.
£82.31Price
Petrol Engine Belt Replacement & Chain in Head Service Kit - VAG 1.8/1.8T, 2.0 FSi/TFSi/TSi, 2.0 S/R
Suitable for belt tensioning the huge range of VAG 1.8/1.8T, 2.0 FSi/TFSi twin camshaft engines. These belt drive engines also have a chain in head, connecting the two camshafts. The kit includes the tools necessary for servicing the chain in head and establishing correct valve/camshaft timing.
£82.94Price
£82.96Price
Designed to detect a variety of common engine faults including; worn piston rings, worn valves, cylinder head cracks and blown head gaskets. Twin gauge manifold shows percentage of cylinder leakage and cylinder pressure. Supplied in storage case with instructions. For spark plugs fitted into a deep recess, VS200/A, Long Reach Compression Tester Adaptor may be required.
£82.96Price
£82.96Price
Designed to measure return fuel flow on diesel vehicles up to 6-cylinders fitted with common rail injection system. Identifies worn, blocked or inoperative injectors quickly and easily. Supplied with measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation. Supplied in storage case.
£82.96Price
Accurately measures the strength of battery fluid, screenwash, antifreeze and AdBlue® by measuring the refractive index of light passing through the mixture. Suitable for synthetic antifreeze mixtures including long-life OAT (Organic Acid Technology), G13 and aqueous/urea content of AdBlue®. Temperature corrected prism ensures accuracy. Eyepiece with adjustable focus. Simple calibration check...
£82.96Price
Six, Chrome Molybdenum, open-sided, 1/2"Sq drive sockets for injector removal and installation.
£82.96Price
£86.14Price
Designed to test low voltage glow plug operation on modern diesel engines. Prevents glow plug damage caused by testing with the vehicle battery. Glow plugs can be tested whilst in situ. Supplied in storage case with instructions. Requires 9V battery (not included).
£86.14Price
£87.73Price
Suitable for Ford EcoBlue 2.0L engines. Designed for the extraction of seized injectors. This method of extraction will damage the injector beyond repair and will require replacement. Equivalent to OEM 303-1690, 303-1690-01.
£87.73Price
£87.75Price
Set of seven diesel injector seat cleaners, ream, centring pilot and T-handle. Used to clean/decarbonise injector seats when changing injectors. Helps to avoid blow-back due to poorly seated injectors. Suitable for a wide range of vehicles.
£87.75Price
£87.75Price
Precision mechanism with Ø55mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality. Will indicate the deviation from set size by up to 3mm with an accuracy of 0.01mm. Probe body, dial indicator, anvils and spacer rings are also included. Supplied in wooden storage case.
£87.75Price
Suitable for the 3.7 and 4.2 V8 engines in Audi and VW vehicles. Kit includes camshaft setting plate, crankshaft locking pin and tensioner tools. Supplied with a warning tag.
£88.13Price
£89.49Price
High resolution laser thermometer that detects energy emission in the infrared spectrum and converts reading into a display of temperature. Features laser pointer, Maximum/Minimum/Average/Difference readings, data storage and data-hold function, high/low alarm setup, auto-power-off. Temperature is displayed on a large 29mm LCD panel with back-lit display for use in low light areas. Temperature...
£89.49Price
Compact size meter with 4-digit 22mm, high-contrast LCD display and back light. Features auto-ranging, data-hold and auto-power-off functions. Includes inductive coupler (IC) for fast reading of engine rpm. Supplied with probe, crocodile clip and thermocouple leads for easy hook-up.
£89.97Price
Professional 2-pole voltage tester CAT IV 1000V for checking high voltage on electric/hybrid vehicles. Suitable for checking AC mains and DC power supplies between 6-1000V DC and 24-1000V AC. Can also be used for checking voltage and polarity on car batteries and continuity testing of DC circuits. Includes a self-test function and illumination light. EN 61243-3, IP65, CE certified. Requires 2 x...
£89.97Price
Diesel engine compression gauge, which reads up to 600psi. Used in conjunction with Sealey glow plug adaptor kits (Model No's VSE3151, VSE3152, VSE3153). Features TDC finder which connects onto glow plug adaptors. Supplied in storage case with extra storage space.
£90.94Price
£91.24Price
Time and money saving kit for replacing damaged oxygen sensor threads with a new threaded insert. Kit includes installation tool, reamer, two taps and five inserts in storage case.
£91.24Price
Comprehensive kit for separating automotive air conditioning hoses and fuel lines. Suitable for a wide variety of vehicles including, amongst others, Ford and Vauxhall/Opel. Supplied in storage case.
£91.24Price
£91.74Price
Ratchet crimping tool with laminated steel jaws and insulated grips. Suitable for 1.5, 2.5 and 6mm² insulated terminals. Approximately 500 assorted terminals supplied, with 50 cable ties and insulating tape, in storage case.
£91.74Price
Class 2 High voltage insulating rubber floor mat. Essential item required to protect vehicle technicians from the risk of electric shock when working on electric or hybrid vehicles. Independently tested and certified as offering safe protection up to 17kV AC in accordance with BS EN 61111.
£92.68Price
Timing kit suitable for 1.2, 1.4 TFSi and 1.4, 1.6 FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Supplied in storage case.
£93.32Price
Specialised kit for timing belt replacement of VAG vans with 2.4/2.5D diesels, including the latest common rail engines. Kit includes crankshaft pulley holding tool, camshaft setting plate, injection pump and crankshaft locking pins and tensioner adjuster.
£93.32Price
Tool kit for releasing the tensioner load from auxiliary belts when removing/installing the belt. Ratchet wrench with multi-positional extension handle for improved access to tensioner. Kit includes sockets, hex bits and square drives. Covers a wide range of spring loaded tensioner applications.
£93.32Price
Long reach tool designed for awkwardly positioned tag-type hose clips. Flexible cable and compact head help operation in confined spaces. Three interchangeable heads, one cable for standard hose clamp, 670mm long and 3-52mm opening, one cable for Clic-R® Type clamp 635mm long and 0-24mm opening, one cable for dual-sided clamp for spring type and truck hose clamp, 670mm long and 0-75mm opening.
£93.32Price