Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
567 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£367.05Price
A comprehensive kit for testing the compression and leakage on both diesel and petrol vehicles. Features 600psi gauge with large rubber bumper, straight and right angled quick connect fittings and an extensive range of spark/glow plug and injector adaptors. Includes TDC finder, ideal for use when the engine has no crankshaft timing marks. Supplied in storage case. See instructions on Sealey...
£367.05Price
£451.22Price
Allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems. Fast and simple-to-use, maximising earning potential. System is clean and quick to use and connects to a 12V vehicle battery. Features air and smoke mode with pressure gauge display. Supplied with cone adaptor, power cord clamp, valve core wrench, test...
£451.22Price
£469.18Price
Necessary for pre-tensioning self-adjusting clutches before removal or installation. Prevents plate distortion which may prevent the clutch from disengaging or cause dragging. Features a refitting tool, allowing the clutch adjuster to be wound back. Also includes a selection of clutch plate and spigot alignment adaptors. Supplied in storage case.
£469.18Price
£549.77Price
Comprehensive kit of adaptors and fittings for modern petrol fuel injection systems. Components fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure. Supplied with large high pressure gauge reading 0-145psi and 0-1000kPa and a small low pressure gauge for accurate low pressure readings. Pressure release valve fitted with long drain hose...
£549.77Price
Suitable for Ford 1.0/1.1 EcoBoost. Contains tools vital for setting and locking the engine and for setting the position of the variable cam timing units.
£561.73Price
£574.51Price
Single hose Ø75mm, length 5m. Compatible with Sealey EFS101 and EFS102 exhaust fume extraction systems.
£574.51Price
Master Timing Tool Kit for PSA vehicles. Covers a wide range of petrol and diesel engines. Suitable for popular PSA vehicles from 1993 to present. Also suitable for a small range of GM vehicles. Supplied in a high quality storage foam suitable for toolbox drawers. Foam Size: 560 x 390 x 45mm.
£587.26Price
£593.66Price
Features soft rubber cylindrical cone to suit most exhausts. Adjustable height for use on small cars or commercial vehicles. Air inlet valve creates vortex within extractor to ensure all fumes are dispersed (requires air supply). 1.2m Body length with additional 3m flexible ducting. Mounted vertically on trolley with integral duct compartment for easy manoeuvrability and compact storage.
£593.66Price
£614.41Price
Combines the function of surface temperature measurement and real-time thermal imaging. Features a traditional image camera to pinpoint test area with the ability to mix the thermal image over the top at varying intensities. Includes on-screen cursor to accurately locate temperature hotspots. Suitable for many industries including automotive, construction and electrical.
Automotive
• Heated...
£614.41Price
£622.39Price
Suitable for re-cutting inlet/exhaust valve seats concentric to the valve guides. Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application. Supplied in storage case.
£622.39Price
£679.45Price
Allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems. Fast and simple-to-use, maximising earning potential. System is clean and quick to use and connects to a 12V vehicle battery. Features EVAP and smoke mode with flow control valve. Supplied with cone adaptor, power cord clamp, valve core wrench, test oil...
£679.45Price
Camshaft installation kit for VAG/Porsche 1.2, 1.6, 2.0, 2.7, 3.0, 4.0, 4.2 common rail diesel engines. This range of engines has a belt or chain driving one camshaft with interconnecting spring loaded gears driving the second camshaft. This kit contains the essential tooling for correctly aligning the camshafts to each other and to their carrier. Kit is to be used in conjunction with Model...
£777.99Price
The torque multiplier has a 1/2"Sq drive input and 3/4"Sq drive output. A torque multiplier is needed to remove and refit the crankshaft pulley bolt. Specially designed with the correct reduction ratio for the Ford EcoBoost engine. Contains securing bracket and fixings. Supplied in storage case with instructions.
£781.99Price
£897.30Price
The extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, bus, agricultural and marine diesel engines. Supplied in storage case with preformed liner and foam filled lid.
£897.30Price
£1,037.35Price
Suitable for re-cutting inlet/exhaust valve seats concentric to the valve guides. Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application. Supplied in storage case.
£1,037.35Price
£1,089.22Price
Allows the technician to pinpoint all manner of system leaks including the air intake, cooling, evaporation, fuel, exhaust and vacuum systems. Fast and simple-to-use, maximising earning potential. Features single button operation, flow control valve and auto-power-off. Uses mineral oil and workshop air to generate smoke at low pressure while connected to a vehicle. System is clean and quick to...
£1,089.22Price
£1,089.22Price
Stainless steel fuel drainer with venturi type suction. 40L Capacity tank suitable for petrol or diesel. Supplied with suction tubes and adaptors for breaking into vehicle fuel system. CE Certified (ATEX 2014/34/EU).
£1,089.22Price
Master timing tool kit for Ford vehicles. Covers a wide range of petrol and diesel engines from 1.0 to 3.2. Suitable for popular Ford vehicles from 1993 to present. Supplied in a high quality storage foam suitable for toolbox drawers. Foam size 560 x 390 x 45mm.
£1,238.43Price
£1,284.73Price
Essential tool for accurately measuring the high pressure fuel circuit of diesel common rail systems. Features 2,000bar gauge, pressure relief valve and high pressure flexible hoses. The kit also includes a set of dummy pump regulator and injector pipe blanks. Kit allows for a variety of tests to be conducted:
- Engine cranking/running pressure test
- Maximum pump pressure test
- Pump...
£1,284.73Price
£1,340.59Price
Reduce your waste disposal costs* - crushing filters minimizes the volume of your hazardous waste. Air operated oil filter press with safety lock-out device which prevents the door being opened during operation. Floor mounting unit with outlet for waste oil transfer.
* For 'pay by volume' customers.
£1,340.59Price
£1,493.81Price
Wall mounting electric fan fitted with heat resistant ducting and exhaust pipe cone with exhaust gas analyser port. Ideal for bikes, cars and car-derived vans. Requires installation onto workshop wall and ducting to expel exhaust gases. Does not include electrical switch gear. Ideal for smaller garages and workshops where space is limited. Single hose configuration.
£1,493.81Price
Master timing tool kit for VAG vehicles. Covers a wide range of petrol and diesel engines. Suitable for popular VAG vehicles from 1995 to present. Applications include Gen III petrol engines featuring single or twin variable valve timing. Supplied in two high quality storage foams suitable for toolbox drawers. Foam size: 560 x 390 x 45mm.
£1,698.08Price
£1,971.01Price
Suitable for both large and small garages and workshops. Excellent as a back-up machine for garages with purpose-built fume extraction units. Suitable for cars and small commercials up to 10 Tonne GVW. Fitted with exhaust pipe cone that includes a port to allow use with gas analyser probes. Supplied with 6m flexible ducting.
£1,971.01Price
£2,066.77Price
Stainless steel fuel drainer with venturi type suction. 90L Capacity tank suitable for petrol or diesel. Supplied with suction tubes and adaptors for breaking into vehicle fuel system. CE Certified (ATEX 2014/34/EU).
£2,066.77Price
£2,106.67Price
Wall mounting electric fan fitted with heat resistant ducting and exhaust pipe cone with exhaust gas analyser port. Ideal for bikes, cars and car-derived vans. Requires installation onto workshop wall and ducting to expel exhaust gases. Does not include electrical switch gear. Ideal for smaller garages and workshops where space is limited. Twin hose configuration.
£2,106.67Price
£7,732.56Price
The Sealey CC230V uses cutting edge HHO engine cleaning technology. Each unit uses electrolysis to split water molecules into the composite elements of oxygen and hydrogen to produce oxyhydrogen or HHO gas. Simple-to-use machine feeds HHO into the engine through the vehicle air inlet, breaking down any carbon build-up on its way. Carbon builds up layer-on-layer when fuel combusts in the engine...
£7,732.56Price
£7,868.22Price
Provides an off-vehicle, same day workshop cleaning solution. The machine uses a mixture of high pressure air, chemicals and water. This cleaning station along with the Sealey recommended chemicals, offers a fast and cost effective way to completely clean and protect any DPF. Great revenue boost for any workshop. Each treatment will require a DPF Ultra Cleaning Kit (Model No. DPF1KIT) which...
£7,868.22Price