Designed to lock the crankshaft into its timing position via the flywheel. Suitable for 2.2TDCi RWD Ford Transit and 3.2TDCi Ford Ranger.

Comprises camshaft setting tool and belt tensioner locking pin. Suitable for engine timing applications on all 1.4, 1.6 and 1.8 Twinport engines with belt drive.

Prevents damage to the pulley and prolongs the life of the belt. Presented in an interlocking lightweight and compact design. Suitable for most leading brands and models.

Manufactured from high quality stainless steel with spring-return. Suitable for cutting soft wires and plastic e.g. cable ties. Sturdy handles for added grip and comfort.

Checks continuity of blade-type automotive fuses, in or out of fuse holder. Green LED indicates fuse is OK. Also simplifies the removal of faulty fuses.

Suitable for 6-24V DC circuits. Knurled brass body with test light. Probe tip is covered with protective brass screw cap. Tester illuminates when voltage is present. Supplied with cable and alligator earth clip.

Used to counter-hold the crankshaft pulley when loosening/tightening the retaining bolt. Suitable for most Honda vehicles fitted with hydraulic PAS. Use with 1/2"Sq drive breaker bar.

Suitable for Model No's BT2003, BT2014 and other leading brands of battery tester.

Useful 2-piece set with chrome finish shafts and comfort grip handles. Ideal for the removal of coolant hoses, O-rings and seals.

Quality 28mm EVA kneeling mat ideal for the busy mechanic. Oil and water-resistant. Suitable for use on workshop floor when working on wheels, brakes, tyres and exhausts. Also ideal for roadside repairs.

Quick and easy-to-use. Ideal for testing ignition coils, fuel injectors and relays. Powered by 2 x AA batteries (not included). Not suitable for piezo energised fuel injectors.

Designed to remove terminals frequently used on many VAG group vehicles.

Five pairs of coloured cables. Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.

Compact multi-tool ideal for cyclists and motorcyclists. Eight Total Drive® sockets that fit 28 different sizes of fasteners including Metric, Imperial, Whitworth, TRX-Star* and Spline. Includes 12 1/4"Hex bits and magnetic extension bar/bit holder. Will fit into a pocket, luggage or even under the seat of many motorcycles.

Assists in the diagnosis of airbag units and seat belt pretensioners. Connect in place of an airbag or seat belt pretensioner unit to test for component failure. Contains a two ohm resistor and two probe leads. Always follow manufacturer's instructions when testing SRS systems and components.

1.8mm Ultra-stiff, hardened stainless steel scraper blades suitable for numerous workshop and bodyshop applications including gasket scraping and windscreen preparation. Soft grip handle design gives maximum control.

Chrome finish shafts with knurling for fingertip precision. Ergonomically styled handles for comfort, grip and accuracy. Suitable for removal of bushings, cotter pins, O-rings and seals.

Yellow plastic connectors are suitable for joining a 6mm chain. For use with Model No's BYC25M Safety Chain and BYSBKIT Post Kit.

It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. This locking tool securely locates in the teeth and fixes to the housing using...

Designed to lock the high pressure fuel pump sprocket to enable the sprocket nut to be removed. Facilitates the removal of the high pressure fuel pump. Equivalent to OEM 0194-J. Use in conjunction with Model No. VSE5846.

Designed to fit between camshaft sprockets to maintain camshaft timing position. Essential tools for timing belt replacement applications. Supplied as a pair.

Heavy-duty zinc S-shaped hooks. Rope length 2m. Rope thickness Ø1/4". Convenient thumb lever pulley ratchet system. For hanging parts such as calipers and exhausts without the need for removing components. Can also be used to tie down general items in the workshop and at home. Breaking strength 68kg.

Red plastic connectors suitable for joining 6mm chain. For use with Model No's HSC25M Safety Chain.

230mm Long, 4-way crimping tool crimps terminals, strips wires, cuts screws and wires. Handles both insulated and non-insulated terminals 1.5, 2.5 and 6mm². Strips wires 0.75, 1, 1.5, 2.5, 4 and 6mm². Screw cutting capacity from M2.6-M5. Safety insulated handle grips. Supplied with approximately 50 assorted terminals and connectors in a handy storage case.

Fully adjustable metric height indicator for commercial vehicle cabs.