Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
661 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Includes tools for timing the engine and locking the camshafts into position if variable valve timing units have to be removed. Camshaft tools can be used as a counter-hold during removal/installation of variable valve timing units. Fits a wide variety of engines used in Ford and Volvo vehicles. Supplied in a storage case with warning tag and instructions.
£156.36Price
Suitable for Ford ecoboost chain drive petrol engines. Contains the tools required to lock the engine in its timed position. Supplied in a storage case with a warning tag and instructions.
£157.96Price
£157.96Price
A comprehensive hose clip plier set with heavy-duty construction and ratchet locking mechanism on most pliers. Vinyl dipped handles give additional comfort. The kit consists of the following pliers: Space saver hose clip plier for areas where clip contact is restricted, jaw opening 0-70mm. Swivel Clic-R® type plier, jaw opening 0-34mm. Multipurpose hose clamp plier, jaw opening 0-40mm. Remote...
£157.96Price
£157.96Price
£157.96Price
Heavy-duty triple leg 5 Tonne hydraulic puller. Suitable for pulling hubs, flanges, gears and bearings. Supplied with three 2-position puller legs and storage case.
£157.96Price
This kit provides an accurate and time saving method to check the timing belt for deterioration and stretch. Belt stretch may lead to incorrect camshaft timing. Supplied in a storage foam with full instructions.
£160.83Price
£166.73Price
Twin/triple leg puller set with reversible legs allowing internal and external pulling operations. Manufactured from carbon steel with a drop-forged heat treated construction for strength and durability. Supplied with two and three leg yokes. Thrust bearing prevents wear and damage to shaft. Hex head forcing screws suitable for use with a ratchet or spanner.
£166.73Price
Comprehensive kit required for service work on timing chain, cylinder head, HP pump and engine timing applications on VAG 2.7D, 3.0D TDi V6 and 4.0D, 4.2D TDi V8 common rail diesel engines. Kit includes HP pump remover and required locking pin. Kit also includes tools to cover the later 3.0D TDi V6 and 4.2D TDi V8 common rail second generation engines.
£167.53Price
Specialised timing tool kit covering belt replacement applications on a comprehensive range of PSA 1.4, 1.5, 1.6, 2.0 and 2.2HDi common rail diesel engines as well as some Fiat 2.0D and 2.2D JTD/Multijet common rail diesel engines. Includes tools for adjustable crankshaft timing gear. Kit includes engine locked warning tag.
£167.53Price
Diesel Engine Timing Tool Kit - for Renault, Mercedes, Nissan, GM 1.6D/2.0/2.3dCi/CDTi - Chain Drive
Suitable for setting and locking 2.0 and 2.3dCi/CDTi chain drive engines fitted in Renault, Mercedes, Nissan and Vauxhall/Opel models. Includes a crankshaft holding tool. Supplied in storage case with instructions and warning tag.
£167.53Price
Contains the essential tools required to maintain engine timing if the vibration damper has to be removed. Supplied in a storage case with full instructions.
£167.53Price
£167.53Price
Comprehensive kit of hoses, adaptors and fittings for testing the pressure on modern petrol fuel injection systems. Fitted with quick couplings and safety valve to prevent inadvertent discharge of fuel under pressure. Supplied with Ø92mm single high pressure gauge with rubber bumper, reading 0-140psi and 0-10bar. Pressure release valve fitted with long drain hose allows safe recovery of fuel....
£167.53Price
£167.53Price
Designed to counter-hold water pump, camshaft, crankshaft, oil pump, pulleys and sprockets when loosening and tightening the securing bolts. Adaptors included: Ø4.8mm, Ø6mm, 15mm x 6mm square, 15mm x 12mm square, 13mm x 17mm cup, 16mm x 20mm cup, M10, M12 spline, 6mm/10mm/12mm stepped adaptors, adaptor plate and handle. Supplied in storage case.
£167.53Price
Covers the new generation 3 and 4-cylinder common rail diesel engines. Includes the tools required for setting the camshaft drive gears within the cylinder head.
£167.53Price
Covers the range of VAG 1.0 petrol engines. Includes the tools required to hold the camshaft sprockets and to adjust the timing belt tensioner.
£167.53Price
£171.12Price
Used in conjunction with a press, this unit crushes filters up to Ø115mm and removes most of the oil and sludge, which drains into a suitable container (not included). Crushing filters minimizes the cost of disposal of hazardous waste by volume. Supplied with ram extension to allow 2-stage crushing of large filters without repositioning press table. Suitable for Ø38mm(1.5") press rams. Optional...
£171.12Price
Covers a wide range of BMW and Mini Chain Drive Petrol Engines. Includes the necessary tools for setting and locking the camshafts and crankshaft, and a tool for setting the timing chain pre-tension.
£178.70Price
£179.90Price
Cast puller yoke with forged separator. 10 Tonne Hydraulic ram interchangeable with other units in the series. Supplied with Ø75-105mm bearing separator. Maximum puller depth 420mm. Supplied in metal case.
£179.90Price
£186.70Price
Designed to remove damaged/broken glow plugs from cylinder heads. Suitable for glow plugs with an M8 x 1mm and M10 x 1mm thread. Set includes all required adaptors for drilling, centring and pulling for the safe removal of glow plug. Supplied in storage case.
£186.70Price
£186.92Price
Fast and effective remedy for damage to cylinder head glow plug threads. Set includes tools for the precise insertion of threaded inserts into the head and features a unique tap guide system to ensure their correct alignment. Includes four sizes of threaded adaptors suitable for common sizes of glow plug. Supplied in storage case.
£186.92Price
£188.60Price
For extension kit see XXX
Model No. - Description
RWSBKIT - 25m Red/White Post & Chain Kit
HVSA4 - 200 x 300mm High Voltage Warning Sign
HYBRIDSIGN - Hybrid/Electric Vehicle Warning Sign (x2)
HYBRIDTAG - Hybrid/Electric Vehicle Keyring Warning Tag
Ideal for technicians working on modern hybrid and electrical vehicles.
£188.60Price
Suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Width and length adjustable. Engine stand's frame elongates to allow adjustment for length between mounting points.
£238.55Price
Essential tool for timing chain work on Mercedes 1.7D, 2.1D, 2.2D, 2.7D, 3.0D, 3.2D, 3.9D and 4.0D CDi diesel engines. The link separating tool and the link assembly tool allow for quick and easy separation and assembly of the timing chain. May also be used on some Chrysler/Jeep 2.2D, 2.7D and 3.0D CRD diesel engines.
£189.88Price
Timing tool kit that covers a wide range of VAG petrol engines. Includes the necessary tools for setting the engine at TDC, the locking tools for both types of timing chain tensioner and a tool for the oil pump chain tensioner. Also includes the tool essential for removing the camshaft control valve.
£189.88Price
£191.31Price
Forged steel 2-way yoke allows twin or triple leg pulls. 10 Tonne Hydraulic power unit with tommy bar. Suitable for pulling hubs, flanges, gears and bearings. Three 3-position puller arms and three sets of extension plates, supplied in storage case. Hydraulic ram interchangeable with others in series.
£191.31Price
£191.47Price
Used to detect the pulse from the fuel pipes of diesel fuel injectors. Works on most direct injection diesel engines fitted with 6mm(1/4") to 10mm(3/8") external fuel pipes. Suitable for use with most timing lights, engine analysers and multimeters that have an inductive pick-up.
£191.47Price
£200.97Price
Drop-forged Chrome Vanadium steel puller arms with locking/gripping feature. Set includes three sets of 100mm triple leg pullers with locking features which clamp the jaws firmly inside/outside the gear or bearing. Includes 1.2kg slide hammer. Supplied in storage case.
£200.97Price
Essential tools for timing belt replacement on Renault/Nissan 1.5D, 1.9D, 2.2D and 2.5D dCi diesel engines. Covers engine codes K9K, F9Q, G9T, G9U. These engines are also fitted in Vauxhall/Opel, Suzuki, Mitsubishi and Dacia models. Kit includes crankshaft locking pins, belt tensioner tools and camshaft setting plates.
£201.05Price
Suitable for the latest generation VAG TSi petrol engines. Contains essential tools for camshaft and crankshaft locking. Supplied in storage case with full instructions and a warning tag.
£201.05Price
Suitable for chain drive Ford EcoBoost engines. Comprehensive kit which includes VVT locking tools and a multi-spline camshaft socket. Supplied in a storage case with instructions and a warning tag.
£201.05Price