Specially designed caliper bleed nipple spanner simplifies brake bleeding. Fitted with neoprene rubber seals which stops air being put into the system. Colour-coded for easy size identification. Spanner includes 8 and 9mm. Sizes 10 and 11mm available - Model No. VS4512.

Oil filling pipe for VAG DSG transmission that allows simple filling of the gearbox. M24 x 1.5mm male thread with a 1.5m durable plastic hose and an M37.5 x 3mm female thread adaptor which attaches to the oil container. Aluminium connectors that are hardwearing and robust. Knurled edges for superior grip when attaching to the gearbox even with oily hands. OEM Tool: VAS6262A.

For use on VAG vehicles fitted with 7-speed DSG gearboxes. OEM equivalent tool VAS6617/12. Designed to work with Sealey VS7009 gear oil dispensing tool.

Light and compact steel alloy construction for ease of use where space is limited. Rounded jaw edges prevent damage to internal hose reinforcements. Suitable for use on fuel, vacuum and brake hoses.

Manufactured from heat resistant nylon. Rounded jaw edges prevent damage to internal hose reinforcement. Features locking mechanism for simple one-handed use. Suitable for brake, coolant, fuel and vacuum hoses.

Patented design maintains the fluid level in the vehicle's brake or clutch fluid reservoir during the bleeding process. No electricity or compressor required, ideal for use on a vehicle lift. Uses the standard 500ml brake fluid bottle in which fluid is supplied, reducing the possibility of contamination. Fast, simple-to-use and features on/off flow valve.

For use in conjunction with Model No. VS7009 Transmission and Engine Oil Filling System. Suitable for automatic transmissions on VAG vehicles.

Compact design for bending automotive brake pipes without crushing the pipe walls. Rigid construction makes it suitable for steel pipes. Will bend Ø3mm (1/8"), Ø4.75mm (3/16") and Ø6mm (1/4") pipe up to 90°.

DSG oil filling adaptor for VAG 7-speed and 8-speed transmission. Compatible with 1.2 TFSi, 1.4 TFSi, 1.8 TFSi, 1.5 MPi, 1.6 TDi engines. OEM TOOL ASE40910100000. Also suitable for Porsche 8-speed ZF 8DT transmissions. Use in conjunction with Sealey VS7009 transmission oil filling system.

Ingenious time-saving tool and essential for any garage. Measures the brake pad lining on the vehicle without removing the road wheel. Slim design enables the tool to locate the rear of the pad backing plate, allowing the probe to measure the distance between the underside of the backing plate and brake disc. Suitable for both internal and external brake pads. Features calibration line, plus...

Unique lever action floating jaw assembly enables easy removal of caliper from disc while retaining reading. Ideal on discs that have a wear lip. Features a tyre tread depth gauge at the base of the caliper and scale lock. Metric scale with 0.1mm graduations.

Spring loaded pliers, for fitting and removing hoses fitted with constant pressure type hose clips. Designed to be used front or side facing, making the tool fast and effective to use. Slots in 16mm jaws, locate and secure hose clip ends into position. Can also be used as a traditional set of pliers.

Chrome Vanadium steel 1/2"Sq drive sockets. Includes pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.

3/8" Clamp Block for PFT07.

Kit consists of adaptors with thrust bolt assembly and reaction plate suitable for push-back and wind-back brake pistons. Helps prevent damage to pistons and seals.

Twin handles provide even force for accurate pipe forming. Slender design allows pipes to be shaped in situ. Ideal for aluminium, brass, copper and steel pipe. Contoured vinyl grip handles provide extra comfort and control.

Suitable for most automotive applications. Bends pipe without crushing walls. Will bend Ø6, Ø8, Ø10mm (Ø1/4", Ø5/16", Ø3/8") pipe up to 180°.

Thread inserts for Model No. VS0462 Brake Caliper Thread Repair Kit.

Chemically blackened steel spreader plates. An essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most ATE, Bendix, Delco and Girling calipers.

Patented design ensures that the spring mechanism maintains the correct cutting pressure on the pipe at all times. Features a smooth screw action and nickel-plated blade for increased cutting performance.

Fast and easy bleeding of brakes including ABS systems and clutch using air from the tyre. Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage. Adaptors included; Ø25mm Cap and Seal for Lockheed Systems, Ø27mm Cap and Seal for VAG, Ø44/45mm Cap and 2 Seals (Ø44mm thin/Ø45mm...

Chemically blackened steel components in storage case. Aids alignment of clutch plate for assembly.

Vice mounted brake pipe shaping tool, designed for use on automotive applications. Dual stepped sections allow pairing of pipes for correct curvature for uniformed alignment to vehicle. Suitable for 3/16”(4.76mm) cupro-nickel, copper and steel pipe.

Enables retraction of the piston on rear brake calipers. Helps prevent damage to pistons and seals. Special low profile design for VAG vehicles.

Designed to aid installation and removal of brake shoe retaining spring washers, found in drum brake assemblies. Spring loaded, offset jaws enable easy-access to spring washer located behind wheel hubs. Suitable for cars and light commercial vehicles.