Tests ethylene glycol antifreeze mixtures. Features a temperature compensation rotor that automatically adjusts the reading regardless of the coolant temperature. Freeze protection level is indicated on the scale in degrees Celsius.

Heavy-duty construction with PVC dipped handles for added comfort and grip. Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips. Pliers with ratchet locking mechanism for ease of use on lower radiator hoses. Swivel jaws allow use where access is confined.

Spring loaded pliers for easy removal of brake shoe arm. Compresses spring, eliminating pinched fingers and frees hand for replacing brake shoe lever.

For use in conjunction with Model No's VS820, VS821, VS0204, VS0204A, VS0207 and VS0308 Brake & Clutch Bleeding Systems. Brake reservoir cap Ø45mm with straight coupling.

Specially designed caliper bleed nipple spanner simplifies brake bleeding. Fitted with neoprene rubber seals which stops air being put into the system. Colour-coded for easy size identification. Spanner includes 10 and 11mm. Sizes 8 and 9mm available - Model No. VS4511.

Specially designed caliper bleed nipple spanner simplifies brake bleeding. Fitted with neoprene rubber seals which stops air being put into the system. Colour-coded for easy size identification. Spanner includes 8 and 9mm. Sizes 10 and 11mm available - Model No. VS4512.

Light and compact steel alloy construction for ease of use where space is limited. Rounded jaw edges prevent damage to internal hose reinforcements. Suitable for use on fuel, vacuum and brake hoses.

For releasing HENN clamps used on coolant and turbo charger hoses. Applications: BMW, Citroen, Fiat, Ford, Kia, Lexus, Mazda, Mercedes, Nissan, Porsche, Peugeot, VAG, Vauxhall/Opel and Volvo.

Coolant pressure test cap. Use with Model No's VS001, VS0011, VS0012, VS0013, VS0014, VS006, VS0061 or VS0033 testing kit.

Manufactured from heat resistant nylon. Rounded jaw edges prevent damage to internal hose reinforcement. Features locking mechanism for simple one-handed use. Suitable for brake, coolant, fuel and vacuum hoses.

Patented design maintains the fluid level in the vehicle's brake or clutch fluid reservoir during the bleeding process. No electricity or compressor required, ideal for use on a vehicle lift. Uses the standard 500ml brake fluid bottle in which fluid is supplied, reducing the possibility of contamination. Fast, simple-to-use and features on/off flow valve.

Compact design for bending automotive brake pipes without crushing the pipe walls. Rigid construction makes it suitable for steel pipes. Will bend Ø3mm (1/8"), Ø4.75mm (3/16") and Ø6mm (1/4") pipe up to 90°.

Ingenious time-saving tool and essential for any garage. Measures the brake pad lining on the vehicle without removing the road wheel. Slim design enables the tool to locate the rear of the pad backing plate, allowing the probe to measure the distance between the underside of the backing plate and brake disc. Suitable for both internal and external brake pads. Features calibration line, plus...

Unique lever action floating jaw assembly enables easy removal of caliper from disc while retaining reading. Ideal on discs that have a wear lip. Features a tyre tread depth gauge at the base of the caliper and scale lock. Metric scale with 0.1mm graduations.

Spring loaded pliers, for fitting and removing hoses fitted with constant pressure type hose clips. Designed to be used front or side facing, making the tool fast and effective to use. Slots in 16mm jaws, locate and secure hose clip ends into position. Can also be used as a traditional set of pliers.

Prevents fan from rotating, without risk of damaging fan (or fingers), when removing retaining nut. Vinyl dipped handle.

Chrome Vanadium steel 1/2"Sq drive sockets. Includes pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.

3/8" Clamp Block for PFT07.

Kit consists of adaptors with thrust bolt assembly and reaction plate suitable for push-back and wind-back brake pistons. Helps prevent damage to pistons and seals.

Twin handles provide even force for accurate pipe forming. Slender design allows pipes to be shaped in situ. Ideal for aluminium, brass, copper and steel pipe. Contoured vinyl grip handles provide extra comfort and control.

Suitable for most automotive applications. Bends pipe without crushing walls. Will bend Ø6, Ø8, Ø10mm (Ø1/4", Ø5/16", Ø3/8") pipe up to 180°.

Unique design prevents overfilling and air bubbles by turning the rotary switch. Suitable for most vehicles with added adaptors for Ford and GM vehicles. The 5" extensions are designed for hard-to-reach filling expansion bottles. Contents - Funnel with switch, Lid, Caps; Small, Medium, Large, Threaded Cap, GM Adaptor, Ford Adaptor, 5" Extension (x2), 45° Elbow (x2).

Heavy-duty spring loaded pliers for fitting and removing Clic® and Clic-R® hose clips. Special jaws allow the change from fit to remove (and back again) simply by turning the pliers over in your hand. PVC dipped handles for improved grip and comfort.

Thread inserts for Model No. VS0462 Brake Caliper Thread Repair Kit.

Chemically blackened steel spreader plates. An essential tool for retracting the brake piston to allow insertion of new brake pads. Suitable for most ATE, Bendix, Delco and Girling calipers.