For VAG 1.4D, 1.9D, 2.0D TDi PD (Pumpe Duse) and 1.2D, 1.6D, 1.9D, 2.0D CR (Common Rail) engines with Mechanical (Friction Dampened) Belt Tensioner. Kit includes crankshaft locking tools (oval and round gears), plus camshaft and tensioner locking pins.

Timing tool kit suitable for GM 1.4-2.2 EcoTec/EcoFLEX petrol engines. Supplied in a convenient foam storage tray.

Long reach tool designed to get to awkwardly positioned tag-type hose clips. Flexible cable and compact head help operation in confined spaces. Features ratchet action and vinyl dipped handles for comfort and close control.

Suitable for use with Model No's VS0061 and VS0062 Combustion Leak Detectors and other leading brands of detector. Fluid changes colour on detection of CO2 gas.

Associated tool for use in conjunction with a number of Ford timing tool kits for locking the crankshaft in timed position by locating into flywheel. Also suitable for counter-holding crankshaft when releasing or tightening crankshaft pulley bolts. Used on a wide range of Ford engines, particularly diesel 1.8TDdi/TDCi and 2.0TDCi, petrol 1.6Ti-VCT and later 1.25/1.4 16v Duratec.

Used to hold the flywheel when removing or installing the crankshaft damper pulley. Fits a wide variety of Hyundai and Kia diesel vehicles.

Contains flywheel locking tools and camshaft pin for engine timing and timing belt replacement on Land Rover 2.2DTD4, Volvo 2.0D and Ford 2.0/2.2TDCi models.

Locks in place for safe clip removal/refitting. Ideal for use in confined areas. Single-handed use. Range 5-55mm.

Designed to rotate crankshaft on DAF commercial vehicles via flywheel ring gear.

Designed to provide a safe and controlled method of adjusting the belt tensioner when removing/refitting the auxiliary belt. Suitable for Ford and PSA 1.4D and 1.6D diesel engines.

Used to counter-hold the crankshaft pulley to release and tighten the centre bolt. Suitable for a wide range of Ford and Volvo models and engine sizes.

Suitable for extending the front panel of the vehicle to provide increased space in engine compartment for carrying out various service applications. These guides support the front end when it is extended out to "Service Position", which, on a number of models, is required as part of the timing belt replacement procedure.

Removes the diesel pump and retains the pump sprocket in situ so that the sprockets/timing chain configuration remains undisturbed, minimizing the level of engine disassembly. For engine timing use Timing Tool Kit Model No. VSE5666.

Suitable for PSA ET3 code twin camshaft engines. Supplied with timing tools required for timing belt replacement on TU3 1.4 single camshaft engines. Kit includes camshaft and flywheel locking pins, tensioner locking pin and timing belt retaining clip.

Used in conjunction with Model No. AK9634M dial gauge (not included) and enables accurate interpretation of piston position relative to TDC.

Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems, such as the alternator or power steering. Prevents damage to the pulley and prolongs the life of the belt. Two tools included, one for installation and one for removal. Fits most crankshaft pulleys. Supplied in storage case.

Chrome Vanadium steel with a phosphate finish. Designed to rotate the crankshaft on Scania commercial vehicles.

Multipurpose coolant filling system, supplied with six reservoir adaptors, to fit popular sizes of reservoir. Built-in shut-off valve and cleverly designed flow pipe system helps prevent air locks.

Easily disconnects hoses by firmly gripping the lines/tubes. Especially suitable for hoses connected to lines/tubes with a smooth surface where a pushing force is not possible. Pointed jaw tip allows access in confined spaces. Locking design enhances secure gripping and allows single-handed operation. Suitable for 3/16"(5mm), 1/4"(6mm), and 3/8"(10mm) lines and tubes.

Radiator coupler for draining and filling coolant system fitted to Scania trucks and buses.

Timing kit suitable for 1.2, 1.4 TFSi and 1.4, 1.6 FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Supplied in storage case.

Enables thorough flushing of debris and contaminants from cooling system during repair and maintenance. Powered by workshop air, which creates a vacuum to draw water from a container. Can also be used with mains pressure tap water.

Designed to rotate crankshaft on Mercedes commercial vehicles via flywheel ring gear.

Suitable for Hyundai and Kia chain drive diesel engines. Essential tool for removing the fuel pump sprocket on 2.0D - 2.2D diesel engines.

Contains the tooling required to set and lock the engine along with a tensioner locking pin on Ford 1.6 EcoBoost engines. Includes a time-saving crankshaft pulley alignment tool. Camshaft locking tool is included which has to be used to set and lock the camshafts into their timing position when the variable valve timing sprockets have to be removed. Timing pins included are suitable for Ford...