Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
446 products
Grid
Grid-2
List
List-2
Catelog
Active filters
Tests ethylene glycol antifreeze mixtures. Features a temperature compensation rotor that automatically adjusts the reading regardless of the coolant temperature. Freeze protection level is indicated on the scale in degrees Celsius.
£20.72Price
£20.80Price
Heavy-duty construction with PVC dipped handles for added comfort and grip. Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips. Pliers with ratchet locking mechanism for ease of use on lower radiator hoses. Swivel jaws allow use where access is confined.
£20.80Price
£20.80Price
Spring loaded pliers for easy removal of brake shoe arm. Compresses spring, eliminating pinched fingers and frees hand for replacing brake shoe lever.
£20.80Price
Provides timing retention for Ford 2.0, 2.2, 2.4 and 3.2 Duratorq ‘Puma’ chain diesel engines. Kit comprises Flywheel Locking Pins (common rail and non-common rail), Camshaft and Injection Pump Locking Pins, Tensioner Locking Pin.
£21.02Price
For use in conjunction with Model No's VS820, VS821, VS0204, VS0204A, VS0207 and VS0308 Brake & Clutch Bleeding Systems. Brake reservoir cap Ø45mm with straight coupling.
£21.02Price
£21.02Price
Drop-forged, carbon steel reversible legs and body. Heat treated and chrome plated to resist corrosion. Hex head forcing screws suitable for use with a ratchet or spanner.
£21.02Price
£21.02Price
Specially designed caliper bleed nipple spanner simplifies brake bleeding. Fitted with neoprene rubber seals which stops air being put into the system. Colour-coded for easy size identification. Spanner includes 10 and 11mm. Sizes 8 and 9mm available - Model No. VS4511.
£21.02Price
£21.02Price
Specially designed caliper bleed nipple spanner simplifies brake bleeding. Fitted with neoprene rubber seals which stops air being put into the system. Colour-coded for easy size identification. Spanner includes 8 and 9mm. Sizes 10 and 11mm available - Model No. VS4512.
£21.02Price
£21.90Price
Light and compact steel alloy construction for ease of use where space is limited. Rounded jaw edges prevent damage to internal hose reinforcements. Suitable for use on fuel, vacuum and brake hoses.
£21.90Price
£21.90Price
4-Tier telescopic aluminium tailgate/bonnet support with tough rubber pads at each end. Lock in any position with a simple twist. Also used for holding open doors, depressing the clutch, brake or accelerator pedals. Length 2.4m. Max capacity 17.14kg fully extended.
£21.90Price
£21.98Price
For releasing HENN clamps used on coolant and turbo charger hoses. Applications: BMW, Citroen, Fiat, Ford, Kia, Lexus, Mazda, Mercedes, Nissan, Porsche, Peugeot, VAG, Vauxhall/Opel and Volvo.
£21.98Price
£21.98Price
Coolant pressure test cap. Use with Model No's VS001, VS0011, VS0012, VS0013, VS0014, VS006, VS0061 or VS0033 testing kit.
£21.98Price
£22.23Price
Manufactured from heat resistant nylon. Rounded jaw edges prevent damage to internal hose reinforcement. Features locking mechanism for simple one-handed use. Suitable for brake, coolant, fuel and vacuum hoses.
£22.23Price
£22.31Price
Patented design maintains the fluid level in the vehicle's brake or clutch fluid reservoir during the bleeding process. No electricity or compressor required, ideal for use on a vehicle lift. Uses the standard 500ml brake fluid bottle in which fluid is supplied, reducing the possibility of contamination. Fast, simple-to-use and features on/off flow valve.
£22.31Price
£22.77Price
Heavy-duty twin leg bar type puller, suitable for easy removal of pulleys, flywheels, bearings and gears. Drop-forged Chrome Vanadium steel. Heat treated for added strength. Zinc plated for corrosion resistance. Thrust bearing prevents wear and damage to shaft.
£22.77Price
£23.11Price
Compact design for bending automotive brake pipes without crushing the pipe walls. Rigid construction makes it suitable for steel pipes. Will bend Ø3mm (1/8"), Ø4.75mm (3/16") and Ø6mm (1/4") pipe up to 90°.
£23.11Price
£23.67Price
Adjustable legs allow insertion of pegs into holes in camshaft pulleys. Suitable for coarse and fine positioning of camshaft for timing on a variety of engines including Ford Zeta and Zetec engines. Legs open up to 126mm. Comfortable screwdriver type grip.
£23.67Price
£23.81Price
Highly visible Black/Yellow post with base. The base can be filled with dry sand for added stability. Suitable for use with Model No. BYSBKIT for extending the safety barrier when working on hybrid or electric vehicles.
£23.81Price
Specifically designed to aid the task of reaching the auxiliary belt tension unit in order to remove and re-fit auxiliary belts on the Di/TDdi/TDCi engines. In many cases tension unit cannot be accessed and adjusted with general tools.
£23.89Price
Covers the complete range of Ford Duratec engines 1.25, 1.6, 1.8, 2.0, 2.3 16v in both belt and chain drive variants.
£23.89Price
Specially designed wrench to allow for access to the auxiliary belt tensioner where access is limited. For 1.4 direct injection 4-cylinder TSi and TFSi BlueMotion engines.
£23.89Price
Suitable for VAG 1.4, 1.6 twin camshaft, belt drive, petrol engines introduced in 1997. Dependant on the engine variant/sprocket position, either the complete tool or the pins alone may be required.
£23.89Price
£23.91Price
Ingenious time-saving tool and essential for any garage. Measures the brake pad lining on the vehicle without removing the road wheel. Slim design enables the tool to locate the rear of the pad backing plate, allowing the probe to measure the distance between the underside of the backing plate and brake disc. Suitable for both internal and external brake pads. Features calibration line, plus...
£23.91Price
Unique lever action floating jaw assembly enables easy removal of caliper from disc while retaining reading. Ideal on discs that have a wear lip. Features a tyre tread depth gauge at the base of the caliper and scale lock. Metric scale with 0.1mm graduations.
£23.91Price
£24.53Price
Forged steel jaws. Suitable for removing bearings, gears and bushes from shafts.
£24.53Price
£24.71Price
Spring loaded pliers, for fitting and removing hoses fitted with constant pressure type hose clips. Designed to be used front or side facing, making the tool fast and effective to use. Slots in 16mm jaws, locate and secure hose clip ends into position. Can also be used as a traditional set of pliers.
£24.71Price
£24.71Price
Prevents fan from rotating, without risk of damaging fan (or fingers), when removing retaining nut. Vinyl dipped handle.
£24.71Price
£24.71Price
Chrome Vanadium steel 1/2"Sq drive sockets. Includes pentagon sockets and bit suitable for the adjustment and installation of Bendix and Girling brakes.
£24.71Price
£24.71Price
Used in conjunction with a standard air hammer at low pressure and 5/16”(8mm) Hex bit. Vibration shakes the screw loose doing the hard work for you, while rotation is applied with the handle. Ideal for corroded, countersunk, overtightened and painted screws. No more stripping of screw heads.
£24.71Price
£24.85Price
