Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
309 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£95.71Price
Capless cooling system tester uses an inflatable bladder to seal the coolant header tank or radiator. Bladder system can be used on both screw and bayonet fittings and seals 90% of cars and light commercial vehicles straight out of the box. Supplied with two adaptors, enabling testing of VAG vehicles with internal threads on header tank. Features quick release couplings, easy-to-read pressure...
£95.71Price
£98.27Price
Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles. Checks for CO2 in cooling system and indicates its presence by test fluid colour change. Use with cone adaptor or in conjunction with radiator caps from Model No's VS001, VS0011, VS0013, VS0014, VS0033 and VS006. For Test Fluid Refill order Model No. VS0061F.
£98.27Price
£99.54Price
All the hose clip tools you are likely to need in one case. Comprehensive set features heavy-duty construction with ratchet locking mechanism on most pliers. Vinyl dipped handles give additional comfort.
£99.54Price
£100.50Price
For use in conjunction with Model No. HP55K1COMBO, when a larger exclusion zone is required.
Model No. - Description
HSC25M - 25m x 6mm Safety Chain Red/White
RCC10 - Plastic Chain Connector Pack of 10
RSH10 - Plastic Chain S-Hook Pack of 10
RWPB01 - Red/White Post with Base (x2)
Ideal for technicians working on modern hybrid and electrical vehicles.
£100.50Price
£100.90Price
Hydraulic ram piston fits all Sealey hydraulic puller sets and is also suitable for use with other popular makes of hydraulic gear pullers. Screw mechanism converts power to 10 Tonne ram head with enough force to remove most stubborn bearings, pulleys and shafts.
£100.90Price
£100.90Price
Forged steel jaws. Suitable for removing bearings, gears and bushes from shafts.
£100.90Price
Essential tools for timing the BMW, BMW Mini 1.5D, 1.6D, 2.0D and 3.0D chain drive diesel engines. Kit includes camshaft setting plate, flywheel locking pin, crankshaft turning tool, and is suitable for the new generation of modular engines. Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications on N47/N57 engines. Supplied in storage case with...
£103.69Price
£103.69Price
Suitable for removing the water pump on Pumpe Duse, diesel, gear drive engines. Essential to align the engine in the TDC position. Supplied in a storage case.
£103.69Price
For the replacement of the timing chain within the cylinder head. Ensures the camshafts are locked into their timed position during timing chain replacement.
£103.69Price
Consists of camshaft setting plate, crankshaft locking tool and belt tensioner adjuster for the 1.2 engine. Additional sprocket locking tool and alignment fixture for the camshaft sensor on the 1.4 VVT engine.
£103.69Price
Contains the timing tools required to cover the belt replacement procedure for both the early and later variants of these engines. The kit includes piston positioning, camshaft and crankshaft locking tools, plus tensioner adjuster and VVT sprocket locking tool. Supplied in storage case with instructions and warning tag.
£103.69Price
Master timing tool kit for a wide range of VAG, Ford and Mitsubishi diesel engines. Suitable for 3 and 4-cylinder belt drive engines. Includes oil pump and belt tensioner locking pins. Supplied in a storage case with instructions and a warning tag.
£103.69Price
Designed to fit the new generation of Ford EcoBlue 'Panther' belt in oil diesel engines. Contains the special tooling essential for locking the engine in its timing position. Supplied in a foam tray with a warning tag and full instructions.
£103.69Price
Designed for the installation of the crankshaft trigger wheel found on Land Rover and Jaguar.
£103.69Price
£103.69Price
Enables fast and simple removal of crankshaft and auxiliary pulleys - even in a confined space. Chrome Molybdenum legs with thin jaws allow removal of pulleys with narrow tolerance between pulley and block. Supplied in storage case.
£103.69Price
£114.07Price
Dramatically reduces cooling system refill time, without mess and without introducing air-locks. No more time consuming cooling system bleeding and no more messy spills to clean up. Simply plug into the workshop air line, attach to the cooling system header tank and create a vacuum. Complete the process by attaching the filler hose and opening the valve allowing your premixed coolant to flow...
£114.07Price
Essential tool for removing/installing the high pressure fuel pump which allows drive gear to retain its timed position when pump is removed. Supplied in a storage case with full instructions.
£117.26Price
£117.26Price
Suitable for a wide range of petrol and diesel engines fitted to Renault and Nissan vehicles. Contains a useful sump/cover separation tool.
£117.26Price
Kit includes camshaft setting plates, camshaft positioning sensor alignment tools and crankshaft locking pin. Supplied in a storage case with warning tag and comprehensive instructions.
£122.84Price
Timing kit suitable for 1.2, 1.4 TFSi and 1.4, 1.6 FSi engines. Kit contains essential tools for crank TDC positioning, camshaft setting and tensioner locking. Includes guide pins for aligning the supercharger. Supplied in storage case with instructions and a warning tag.
£122.84Price
Suitable for Vauxhall/Opel 2.0 CDTi belt drive diesel engines. Essential tools required when replacing the camshaft drive belt. Contains a flywheel locking tool required on vehicles fitted with automatic transmission. Supplied in a storage case with full instructions.
£122.84Price
£145.19Price
Powder coated steel construction, for added corrosion resistance. Freestanding unit, designed to organise the storage of gloves, clothing, boots and helmet. Adjustable shelves allows for easy storage of up to four helmets. Strong construction, shelf capacity of 18kg and hanging rack capacity of 10kg. Large capacity, capable of storing two full sets of kit and more.
£145.19Price
£127.23Price
Mechanical puller set with Ø25-50mm and Ø45-75mm separators and single yoke with 170mm thrust bolt. Suitable for engineering, automotive, marine and agricultural applications. Supplied in storage case.
£127.23Price
£128.11Price
Eliminates the introduction of bubbles and air-locks into the cooling system and dramatically reduces system filling time. No more time-consuming system bleeding. Reduces fluid waste and messy spills. Automatically conducts system leak test. Low profile design broadens application range especially for use on MPVs where lower windscreen lip might obstruct other tools. Simple operation requires...
£128.11Price
£131.62Price
Fully chromed carbon steel medium stroke slide hammer. 370mm Overall length with 0.85kg hammer. Bearing extractor collets with internal capacity from 11-32mm. Supplied in storage case.
£131.62Price
Suitable for a range of 1.3 16v common rail diesel engines used by a number of vehicle manufacturers. The chain drive connects the crankshaft to the exhaust camshaft which in turn is connected by gears to the inlet camshaft. This overhaul kit is designed to minimize the level of disassembly, so the cylinder head/camshafts can be removed without removing the front timing cover, sprockets and...
£134.02Price
Comprehensive kit covers engines which are fitted to a large range of Ford, Volvo and some Mazda vehicles. Contains time-saving tooling to correctly align the timing covers on Ford and Volvo engines, and a crankshaft pulley holder for Mazda engines. Supplied in storage case with instructions and warning tag.
£134.02Price
Comprehensive kit covering engine timing and belt replacement on VAG 1.2-2.0D Pumpe Duse and 1.2, 1.6, 2.0D common rail diesel engines. Also covers these engines fitted in Ford, Dodge and Mitsubishi models. Kit contains crankshaft locking tools for both oval and round crank gears, camshaft locking pins and tensioner adjustment tools. Supplied in storage case.
£134.02Price
Comprehensive kit covers Ford, Mazda and PSA 1.4, 1.5, 1.6, 1.8, 2.0 TDCi/HDi belt drive diesel engines. Includes camshaft, crankshaft and high pressure pump locking tools plus camshaft sprocket removal tool. Kit includes warning tag.
£134.02Price
Suitable for setting and adjusting the timing on N42 and N46 engines with the Valvetronic system. Also includes tools to align the twin Vanos unit.
£134.02Price