Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
701 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£19.12Price
Ideal for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.
£19.12Price
£19.36Price
Quality construction with sprung steel wraps and ratchet action tension mechanism. Supplied with steel key.
£19.36Price
Satin finish steel construction with 3/8"Sq drive. Spring loaded claws automatically adjust to the size of the filter. Features magnets to help positioning on oil filter.
£19.36Price
£21.98Price
Set includes three wrenches; 8mm, 9mm, 10mm and three types of adjuster shafts; flat blade type, 3mm, 4mm square type. The wrenches and shafts are interchangeable to give nine different combinations suitable for tappet adjustments on most motorcycle and ATV engines.
£21.98Price
£24.53Price
Suitable for holding flywheels, clutches and pulleys during removal and installation. 8mm Pins on one side and flat blades on the other. Features locking adjustment screw to keep tool at required set size with quick release when finished.
£24.53Price
£19.92Price
Ideal for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer.
£19.92Price
£19.92Price
Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Set includes drill bit, thread tap, insert installation and lug breaking tool. Supplied with three different lengths of thread insert.
£19.92Price
Double end tool. Enables retraction of the piston on rear brake calipers allowing new brake pads to be installed.
£20.08Price
Double end tool. Enables retraction of the piston on rear brake calipers allowing new brake pads to be installed.
£20.08Price
Satin finish cast steel body with 3/8" and 1/2"Sq drive. Designed for use with ratchet wrench, but may also be used with a 21mm(13/16") spanner. Extra-wide nylon webbing strap.
£20.08Price
£20.14Price
Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems. Can also be used to calibrate the driver's instrument panel. Will also check the engine oil level on Audi; A4/A5 3.2 6-cylinder engines.
£20.14Price
£20.14Price
Essential for reintroduction of fuel into fuel pump following maintenance such as fitting of new diesel filter, or following drainage of fuel tank. Must be used whenever fuel system is disturbed.
£20.14Price
£20.14Price
Specially designed to repair damaged spark plug threads on modern engines. Unique design allows the tool to be passed through the plug thread into the combustion chamber, then expanded to the correct size starting on the inner, undamaged threads. Traditional thread restorers rely on luck for the restored and undamaged threads to align. The first letter(s) of a Denso, NGK and Bosch plug code is...
£20.14Price
£20.72Price
For removing and refitting the fuel filter cap when replacing the fuel cartridge on 2.0D, 2.4D, 2.5TDi diesel engines found in VW and Volvo vehicles.
£20.72Price
£20.72Price
Refill pack for Model No. VS640 Mercedes CDi Injector Stud Repair Kit. Contains five M8 x 1mm inserts.
£20.72Price
Tests propylene glycol antifreeze mixtures. Features a temperature compensation rotor that automatically adjusts the reading regardless of the coolant temperature. Freeze protection level is indicated on the scale in degrees Celsius.
£20.72Price
Tests ethylene glycol antifreeze mixtures. Features a temperature compensation rotor that automatically adjusts the reading regardless of the coolant temperature. Freeze protection level is indicated on the scale in degrees Celsius.
£20.72Price
£20.72Price
Check fuel injector signal faults fast. Simply disconnect injector harness and plug in noid light. Turn the ignition on - if the light is steady or absent, then signal from ignition system is at fault. Easy-to-use and fits a wide variety of injector harnesses.
£20.72Price
Suitable for removing the cap from the oil filter housing on Ford, Citroen, Peugeot 2.0D/2.2D HDi/TDCi diesel engines (DW10C, DW12C) and Jaguar XF 2.2D from 2012 onwards. Allows access to the hard-to-reach 27mm hex located on the filter cap. Use with 1/2"Sq drive wrench.
£20.80Price
£20.80Price
Heavy-duty construction with PVC dipped handles for added comfort and grip. Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips. Pliers with ratchet locking mechanism for ease of use on lower radiator hoses. Swivel jaws allow use where access is confined.
£20.80Price
£20.80Price
Spring loaded pliers for easy removal of brake shoe arm. Compresses spring, eliminating pinched fingers and frees hand for replacing brake shoe lever.
£20.80Price
Suitable for deep-seated and longer type oxygen sensors found on modern vehicles. Cut-out section enables socket to be fitted over wiring harness.
£20.80Price
Provides timing retention for Ford 2.0, 2.2, 2.4 and 3.2 Duratorq ‘Puma’ chain diesel engines. Kit comprises Flywheel Locking Pins (common rail and non-common rail), Camshaft and Injection Pump Locking Pins, Tensioner Locking Pin.
£21.02Price
For use in conjunction with Model No's VS820, VS821, VS0204, VS0204A, VS0207 and VS0308 Brake & Clutch Bleeding Systems. Brake reservoir cap Ø45mm with straight coupling.
£21.02Price
£21.02Price
Specially designed caliper bleed nipple spanner simplifies brake bleeding. Fitted with neoprene rubber seals which stops air being put into the system. Colour-coded for easy size identification. Spanner includes 10 and 11mm. Sizes 8 and 9mm available - Model No. VS4511.
£21.02Price
£21.02Price
Specially designed caliper bleed nipple spanner simplifies brake bleeding. Fitted with neoprene rubber seals which stops air being put into the system. Colour-coded for easy size identification. Spanner includes 8 and 9mm. Sizes 10 and 11mm available - Model No. VS4512.
£21.02Price
£21.51Price
Aluminium alloy construction with profiled head. Suitable for releasing connections on in-line fuel line filters during servicing and maintenance.
£21.51Price
£21.51Price
Specialised socket set consisting of 8, 9 and 10mm sockets. Designed to remove and install glow plugs without having to cut the power lead off. Applications include Alfa Romeo, Fiat, GM and PSA engines.
£21.51Price
Designed for use with deep-seated spark plugs. Magnetic insert to retain spark plug. 250mm Long, 3/8"Sq drive, 12-point socket.
£21.51Price
Designed for use with deep-seated spark plugs. Magnetic insert to retain spark plug. 250mm Long, 3/8"Sq drive, 12-point socket.
£21.51Price