Filter
Filter
Popular Products
Vehicle Service Tools
Subcategory
View Left Column
309 products
Grid
Grid-2
List
List-2
Catelog
Active filters
£134.26Price
Drop-forged, Chrome Vanadium steel reversible legs. Swivel thrust plates on larger sizes prevent damage to shaft ends. Hex head forcing screws suitable for use with a ratchet or spanner. Supplied in a storage case.
£134.26Price
Drop-forged, Chrome Molybdenum steel reversible legs and body. Suitable for pulling hubs, flanges, gears and bearings. Features ratcheting mechanism to locate and hold the legs in the correct position, making the tool faster and easier to operate than conventional pullers. Supplied in storage case.
£136.01Price
£136.89Price
Diagnose blown gaskets, cracked blocks and cylinder heads on both petrol and diesel vehicles. Checks for CO2 in cooling system and indicates its presence by test fluid colour change visible in the premium quality chamber. Use with cone adaptor or in conjunction with radiator caps from Model No's VS001, VS0011, VS0013, VS0014, VS0033 and VS006. For Test Fluid Refill order Model No. VS0061F.
£136.89Price
Covers a wide range of Vauxhall/Opel and Chevrolet petrol engines. Includes the necessary tools for setting and locking the camshafts and crankshaft, and pins for locking the timing chain tensioner. Supplied in a storage case with instructions and a warning tag.
£139.60Price
£143.03Price
Puller yoke with 10 Tonne hydraulic ram. Suitable for four and five stud hubs. Hydraulic ram provides additional power to extract the most stubborn hubs.
£143.03Price
£143.59Price
Cooling system pressure test kit, with vehicle specific cap adaptors. Features quick release couplings, easy-to-read pressure gauge and release valve. Caps cover the latest Alfa Romeo, Audi, BMW, Citroen, Dacia, Fiat, Ford, Honda, Hyundai, Jaguar, Kia, Land Rover, Lexus, Mazda, Mercedes, Mini, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Seat, Skoda, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW...
£143.59Price
Covers the new generation 3 and 4-cylinder common rail diesel engines. Includes the tools required for setting the camshaft drive gears within the cylinder head.
£145.19Price
Comprehensive kit for timing 2.0D, 2.2D and 2.4D Duratorq chain driven diesel engines fitted in Citroen, Fiat, Ford, Jaguar, Land Rover, LDV and Peugeot vehicles. Kit includes sprocket retaining plates for both early and later engines and access cover removal plate tools for injection pump removal/installation. Supplied in storage case.
£145.19Price
£145.19Price
Contains essential tools required when replacing the timing chain. Contents include crankshaft pulley hub holding tool and camshaft position sensor positioning tool. Supplied in a storage case with instructions and a warning tag.
£145.19Price
£145.19Price
Suitable for timing distributor type diesel fuel pumps on engines fitted with Bosch VE Rotary, Kiki, Nippon Denso, CAV Rotodiesel - top entry port. These systems are mainly found on cars and light commercial vehicles. Supplied with dial gauge in storage case.
£145.19Price
Timing tool combination kit suitable for a wide range of belt or chain driven petrol and diesel engines. Contains a camshaft sprocket puller and flywheel locking tools. Supplied in a storage case with instructions and a warning tag.
£150.77Price
£150.93Price
2.3kg Slide hammer with 580mm shaft. Use eight ways: external 3-leg puller, internal 3-leg puller, external 2-leg puller, internal 2-leg puller, grip wrench adaptor, lip puller, hub puller, dent puller. Supplied in storage case.
£150.93Price
Designed for refrigerant testing, charging and evacuation. Can be used on automotive, commercial and domestic A/C and domestic refrigeration systems. Gauges marked for R134a and R12 pressure reading. Colour-coding on gauges, valves and hoses for easy operation. Features 2-way manifold and sight glass for monitoring refrigerant flow. Quick couplings included and hanging hook.
£155.58Price
Kit fits a wide range of VAG group 1.8, 2.0 petrol engines. Includes essential tooling required to remove the camshaft adjuster valves, and a useful crankshaft pulley holding tool. Some applications and repair operations will require additional tools.
£156.36Price
Suitable for 1.6CRDi belt drive diesel engines. Contains the essential tools required during timing belt replacement and timing checks.
£156.36Price
Includes tools for timing the engine and locking the camshafts into position if variable valve timing units have to be removed. Camshaft tools can be used as a counter-hold during removal/installation of variable valve timing units. Fits a wide variety of engines used in Ford and Volvo vehicles. Supplied in a storage case with warning tag and instructions.
£156.36Price
Suitable for Ford ecoboost chain drive petrol engines. Contains the tools required to lock the engine in its timed position. Supplied in a storage case with a warning tag and instructions.
£157.96Price
£157.96Price
A comprehensive hose clip plier set with heavy-duty construction and ratchet locking mechanism on most pliers. Vinyl dipped handles give additional comfort. The kit consists of the following pliers: Space saver hose clip plier for areas where clip contact is restricted, jaw opening 0-70mm. Swivel Clic-R® type plier, jaw opening 0-34mm. Multipurpose hose clamp plier, jaw opening 0-40mm. Remote...
£157.96Price
£157.96Price
Heavy-duty triple leg 5 Tonne hydraulic puller. Suitable for pulling hubs, flanges, gears and bearings. Supplied with three 2-position puller legs and storage case.
£157.96Price
This kit provides an accurate and time saving method to check the timing belt for deterioration and stretch. Belt stretch may lead to incorrect camshaft timing. Supplied in a storage foam with full instructions.
£160.83Price
£166.73Price
Twin/triple leg puller set with reversible legs allowing internal and external pulling operations. Manufactured from carbon steel with a drop-forged heat treated construction for strength and durability. Supplied with two and three leg yokes. Thrust bearing prevents wear and damage to shaft. Hex head forcing screws suitable for use with a ratchet or spanner.
£166.73Price
Comprehensive kit required for service work on timing chain, cylinder head, HP pump and engine timing applications on VAG 2.7D, 3.0D TDi V6 and 4.0D, 4.2D TDi V8 common rail diesel engines. Kit includes HP pump remover and required locking pin. Kit also includes tools to cover the later 3.0D TDi V6 and 4.2D TDi V8 common rail second generation engines.
£167.53Price
Specialised timing tool kit covering belt replacement applications on a comprehensive range of PSA 1.4, 1.5, 1.6, 2.0 and 2.2HDi common rail diesel engines as well as some Fiat 2.0D and 2.2D JTD/Multijet common rail diesel engines. Includes tools for adjustable crankshaft timing gear. Kit includes engine locked warning tag.
£167.53Price
Diesel Engine Timing Tool Kit - for Renault, Mercedes, Nissan, GM 1.6D/2.0/2.3dCi/CDTi - Chain Drive
Suitable for setting and locking 2.0 and 2.3dCi/CDTi chain drive engines fitted in Renault, Mercedes, Nissan and Vauxhall/Opel models. Includes a crankshaft holding tool. Supplied in storage case with instructions and warning tag.
£167.53Price
Contains the essential tools required to maintain engine timing if the vibration damper has to be removed. Supplied in a storage case with full instructions.
£167.53Price
£167.53Price
Designed to counter-hold water pump, camshaft, crankshaft, oil pump, pulleys and sprockets when loosening and tightening the securing bolts. Adaptors included: Ø4.8mm, Ø6mm, 15mm x 6mm square, 15mm x 12mm square, 13mm x 17mm cup, 16mm x 20mm cup, M10, M12 spline, 6mm/10mm/12mm stepped adaptors, adaptor plate and handle. Supplied in storage case.
£167.53Price
Covers the new generation 3 and 4-cylinder common rail diesel engines. Includes the tools required for setting the camshaft drive gears within the cylinder head.
£167.53Price
Covers the range of VAG 1.0 petrol engines. Includes the tools required to hold the camshaft sprockets and to adjust the timing belt tensioner.
£167.53Price
Covers a wide range of BMW and Mini Chain Drive Petrol Engines. Includes the necessary tools for setting and locking the camshafts and crankshaft, and a tool for setting the timing chain pre-tension.
£178.70Price
£179.90Price
Cast puller yoke with forged separator. 10 Tonne Hydraulic ram interchangeable with other units in the series. Supplied with Ø75-105mm bearing separator. Maximum puller depth 420mm. Supplied in metal case.
£179.90Price