Safety warning tag for placing with hybrid or electric vehicle keys whilst service or repair operations are being carried out. It is essential that the vehicle keys are kept secure and away from the vehicle during service or repair work. 80 x 110mm 400gsm paper with gloss finish.

Wire brushes remove corrosion build-up on battery posts and terminals for improved electrical contact.

Fluid transfer tool suitable for battery top-up and level adjustment of coolant and screenwash.

Essential safety warning sign for placing on a hybrid or electric vehicle whilst service or repair operations are being carried out. A4 300gsm paper with wipeable gloss finish. Includes a box for the technician's name, to clearly identify who is working on the vehicle.

Tests 6, 12 and 24V batteries. Composite body and rubber bulb for workshop durability.

Suitable for 6-24V DC circuits. Insulated body with test light. Probe tip is covered with protective plastic cap. Tester illuminates when voltage is present. Supplied with cable and alligator earth clip.

Tests HT supply to spark plug. Suitable for spark ignition engines. Quick and simple fault diagnosis.

Removes heavy corrosion build-up on battery posts and terminals for improved electrical contact. Features clamp reamer and terminal scrapers.

Mini puller with spring loaded jaws designed for removal of corroded battery clamps from terminals. Also suitable for removal of small gears, pulleys and bearings.

For adjusting the adaptive cruise control (ACC) RADAR unit. Equivalent to VAG tool VAS6190/2. Manufactured from Chrome Vanadium with satin finish.

Flexible plastic covered wire with attachment loop. For guiding/pulling replacement automotive wiring into position through confined spaces. Suitable for use with insertion tools.

Enables user to disconnect electrical connectors quick and easy without causing damage. Double ended design allows access at different angles. Can be used with most car and commercial vehicle electrical connectors.

Professional battery hydrometer. Tests 6, 12 and 24V batteries. Float gauge and thermometer built-in. Tube construction with thermometer for temperature compensation.

Manufactured from high quality stainless steel with spring-return. Suitable for cutting soft wires and plastic e.g. cable ties. Sturdy handles for added grip and comfort.

Checks continuity of blade-type automotive fuses, in or out of fuse holder. Green LED indicates fuse is OK. Also simplifies the removal of faulty fuses.

Suitable for 6-24V DC circuits. Knurled brass body with test light. Probe tip is covered with protective brass screw cap. Tester illuminates when voltage is present. Supplied with cable and alligator earth clip.

Suitable for Model No's BT2003, BT2014 and other leading brands of battery tester.

Quick and easy-to-use. Ideal for testing ignition coils, fuel injectors and relays. Powered by 2 x AA batteries (not included). Not suitable for piezo energised fuel injectors.

Designed to remove terminals frequently used on many VAG group vehicles.

Five pairs of coloured cables. Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.

Assists in the diagnosis of airbag units and seat belt pretensioners. Connect in place of an airbag or seat belt pretensioner unit to test for component failure. Contains a two ohm resistor and two probe leads. Always follow manufacturer's instructions when testing SRS systems and components.

Yellow plastic connectors are suitable for joining a 6mm chain. For use with Model No's BYC25M Safety Chain and BYSBKIT Post Kit.

Red plastic connectors suitable for joining 6mm chain. For use with Model No's HSC25M Safety Chain.

230mm Long, 4-way crimping tool crimps terminals, strips wires, cuts screws and wires. Handles both insulated and non-insulated terminals 1.5, 2.5 and 6mm². Strips wires 0.75, 1, 1.5, 2.5, 4 and 6mm². Screw cutting capacity from M2.6-M5. Safety insulated handle grips. Supplied with approximately 50 assorted terminals and connectors in a handy storage case.

Suitable for testing electrical circuits from 3 to 48V DC. Integral, spring loaded, pointed probe for testing through insulation. Twin LEDs indicate live circuit and polarity. Supplied with 0.9m cable and insulated crocodile earth clamp.

Removes heavy corrosion for improved electrical contact on battery terminals. Unique design makes spreading the battery terminal clamp easy, for quick installation. Ergonomic handle with a comfortable non-slip grip. Fits most battery clamps with min./max. 15-20mm clamp opening.

Pocket wire stripping tool suitable for automotive and electrical trades. Features a spring loaded safety lock.

Red plastic S-hooks suitable for attaching 6mm chain to posts. For use with Model No's HSC25M Safety Chain.

Suitable for Model No. BT2012.V2, BT2015 and other leading brands of battery tester.

Automatic wire stripper and cutter operates in one easy single-handed operation. Stripping capacity 0.2-6mm². Built-in side cutter with maximum cutting capacity: 4mm². Stripping length up to 15mm. Handle lock with automatic wire size adjustment allows you to work quickly and efficiently.