Stainless steel tools for the easy removal of Mercedes radios, ignition locks and dashboard instruments. Also suitable for removal of Vauxhall/Opel headrest. Supplied in a composite storage case.

Suitable for testing 6, 12 and 24V DC circuits. Insulated, pointed probe tests through wire insulation. Supplied with 1.5m cable and crocodile earth clamp.

LED Indicators verify condition of battery and alternator. Suitable for 12V DC systems. Magnetic backing sticks to metal surfaces for hands-free operation. Fitted with 900mm cable, probe and crocodile clips.

Designed for professional installers and vehicle technicians. Capable of overcoming most day-to-day cable installation problems, particularly in domestic and commercial buildings. Ideal for installing wires through vehicle bodywork. Includes a hook and flexible joint with eye and 320mm screw-in polyester rods (x10) with a total length of 3.2m. Supplied in storage tube.

Set allows single or multiple testing. Simply fit tester between spark plug and HT lead and then run engine. Regular flashing of the testers indicates a good HT supply. Not suitable for engines with deeply recessed plugs.

Suitable for 6, 12, 24 and 48V DC circuits. LED array indicates polarity and voltage range. Supplied with 850mm cable and crocodile earth clamp.

Quickly locate the source of engine noise such as piston slap, worn gears and bearings, damaged valves, water pump failure and blown gaskets. Also useful for tracking down dashboard rattles and squeaks. Plastic ear pieces and 300mm probe with sound amplifying chamber.

3mm Steel construction with safety grips. Crimps non-insulated terminals 10-14, 16-18 and 20-22 AWG wire. Crimps open barrel connectors 14-18 and 20-22 AWG wire. Crimps computer pins and sockets D-Sub 26-28 AWG wire. Crimps butt-insulated connectors 22-26 AWG wire. Crimps telephone piercing spade lugs 22-26 AWG wire. Hardened cutting edge for soft wire and cables.

Pocket wire stripping tool suitable for automotive and electrical trades. Built-in retractable knife. Features a spring loaded safety lock.

Makes one-person operation possible for a variety of under the bonnet tasks. Connects to starter system with leads provided and allows push-button turnover of engine. Supplied with 860mm cable.

Handy compact unit, small enough to fit in your pocket, making it ideal for basic circuit testing whilst on the move. Features flip lid for added screen protection and storage of leads. Conforms to EN 61010-1 CAT II safety requirements. Supplied with test leads. Measures: - AC and DC Voltage - DC Current - Resistance - Audible Continuity

Tubular steel handle with comfort grip. Enables fast, safe handling of batteries. Fully adjustable for battery size.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

One-handed, compound action grips and strips electric cables 1-3.2mm² automatically. Jaw action prevents crushing or cutting even the finest wires. Supplied with length gauge and fitted with vinyl grips.

Probe tool allows continuity and polarity tests to be carried out quickly and efficiently on 6, 12 and 24V systems. Polarity indicated by red/green LEDs respectively. Supplied with 1.5m cable and shrouded earth clip.

Electrical hazard warning sign, suitable for use on an exclusion zone around a hybrid or electric vehicle during repair or service operations. Rigid 3mm thick plastic warning sign.

Induction coil for Model No. VS240.

Induction coil for Model No. VS240.

Induction coil for Model No. VS240.

High quality general-purpose multimeter with a large (46 x 25mm), clear and easy-to-read LCD display. Supplied with test leads. Measures: - AC and DC Voltage - DC Current - Resistance - Audible Continuity - Diode/Transistor Verification Mode

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Tough and durable polyethylene storage case, for storage of Model No. AK3857 or AK3858 ratchet crimping tool and jaws. Allows additional storage of terminals for easy selection. Features 25 compartments.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Quick change hardened and tempered jaws. For use with Model No's AK3857 and AK3858.

Plate-steel construction, chemically blackened with oversize vinyl grips. 5-in-1 Wire stripper suitable for wires from 0.13-6mm² (26-10AWG). Crimping attachment suitable for non-insulated terminals including 1.5, 2.5, 4 and 6mm², also insulated auto-ignition terminals 7 and 8mm. Crimps insulated terminals 1.5, 2.5 and 6mm². Includes wire cutters hardened to 40-50 HRC.

Suitable for testing DC circuits with voltages between 3 and 28V. No earth clips to get tangled - simply contact the wire to be tested and touch your finger on bare metal ground to get a reading. Tester illuminates LED, buzzes and vibrates on contacting live wire. Computer-safe for use around delicate engine management systems. Supplied fitted with two long-life N-sized batteries.

Manufactured from high carbon steel with precision dual ground cutting blades. Features spring loaded handles with soft grip and safety lock.