View Left Column
336 products
Grid
Grid-2
List
List-2
Catelog
£2.88£8.59Regular price-£5.71 offPrice
Manufactured from Chrome Vanadium steel. 7-Sided 17mm wheel bolt security socket suitable for Honda, Hyundai and Toyota vehicles.
£2.88£8.59Regular price-£5.71 offPrice
00
day
00
hour
00
min
00
sec
£3.05Price
Used for removal and installation of the core from a wheel valve. Features easy grip handle and ideal for the busy workshop. Suitable for motorcycles, cars and commercial vehicles.
£3.05Price
£3.16Price
Used to clean and widen the puncture before repairing a tubeless tyre. Suitable for car, commercial, agricultural and off-road vehicle tyres.
£3.16Price
£3.77Price
Pencil type gauge with psi scale. Features valve deflator and pocket-clip. Suitable for use as a guide.
£3.77Price
£3.77Price
Phosphate finish with knurled body. Cleans and restores internal and external threads, and also includes valve core removal tool.
£3.77Price
£3.77Price
Chromed steel body with pocket-clip. Scale from 0-25mm in 1mm(0-1" in 1/32") graduations.
£3.77Price
£5.16Price
Suitable for marking tyre damage or areas for repair. Will work on practically any surface including rubber, metal and paint. Paper protective wrapper can be peeled back as crayon wears.
£5.16Price
£5.16Price
Suitable for marking tyre damage or areas for repair. Will work on practically any surface including rubber, metal and paint. Paper protective wrapper can be peeled back as crayon wears.
£5.16Price
Pencil type gauge with psi scale. Features valve deflator and pocket-clip. Suitable for use as a guide.
£5.20Price
£5.79Price
Designed to roll down inner tube and tyre repair patches to remove trapped air and ensure good adhesion. Features a strong wooden handle.
£5.79Price
£6.19Price
Pocket-size tool specifically designed to prevent over tightening of valve cores fitted to wheels/tyres with TPMS. Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs.
£6.19Price
£6.78Price
Chromed steel body with pocket-clip. DVSA Approved depth scale includes 1.6mm graduation for minimum tyre tread requirements. Scale from 0-26mm in 1mm graduations.
£6.78Price
£7.15Price
Suitable for packing bearings with an even spread of grease. Clean, quick operation simply place bearing on to the bottom cone, screw down the cone lid and pump grease into nipple. Works on most tapered roller bearings fitted on cars, boats, trailers, etc. Both cones feature knurled grips for use with oily fingers. Suitable for use with Sealey and other best-selling grease guns.
£7.15Price
£7.50Price
£7.55£19.26Regular price-£11.72 offPrice
Specially designed wrench makes it much easier to access the shock absorber fitting. Applications: Volkswagen Crafter and Mercedes Sprinter. 1/2"Sq Drive 21mm Bi-hex profile.
£7.55£19.26Regular price-£11.72 offPrice
00
day
00
hour
00
min
00
sec
Pencil type gauge with psi scale. Features valve deflator and pocket-clip. Suitable for use as a guide.
£7.87Price
£7.95Price
Simplifies installation of tyre valves in tubeless wheels. Pulls tyre valve assembly through rim. Shank is notched to accommodate various rim styles. Manufactured from resilient nylon to minimize damage and marking to alloy wheels. Features a valve core removal tool mounted in the base of the handle.
£7.95Price
£8.16£24.53Regular price-£16.37 offPrice
Designed to access hard-to-reach fixings on the suspension strut. Suitable for Volkswagen Crafter and Mercedes Benz Sprinter vans.
£8.16£24.53Regular price-£16.37 offPrice
00
day
00
hour
00
min
00
sec
£8.22Price
Simplifies installation of tyre valves in tubeless wheels. Pulls tyre valve assembly through rim. Shank is notched to accommodate various rim styles. Strong 270mm long handle with corrosion resistant plating.
£8.22Price
£8.43£33.47Regular price-£25.04 offPrice
Designed to hold the central strut whilst the securing nut is removed. WARNING: Ensure the road spring has been compressed using a suitable spring compressor BEFORE removing top nut. Applications: Volvo C70 Coupe (-02), C70 Convertible (-05), S70, V70 (-00), XC90, V70 (00-08), V70 XC (01-), XC70 (-07), S60, 850, V70 XC (-00), S80 (-06). OEM Tools: 9995469 and 9995468.
£8.43£33.47Regular price-£25.04 offPrice
00
day
00
hour
00
min
00
sec
£8.59Price
Suitable for the removal and installation of top shock retaining nut. Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock. Use with 22mm spanner.
£8.59Price
4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.
£12.40Price
£8.94Price
Ideal for removing and refitting the wheel hub retaining nuts and adjusting the wheel bearing free play. Suitable for Land Rover taper roller bearings. Use with bar through the Ø14mm cross-drilled holes.
£8.94Price
£12.40Price
Professional seal driver sleeve for Ø35-36mm diameter forks. Split design for easy operation on both conventional and USD (inverted) forks for the installation of fork seals. Available in various sizes ranging from Ø35-48mm to accompany Model No. MS050D - Fork Seal Driver Shell. Manufactured in hard-wearing reinforced nylon for maximum protection of the fork leg.
£12.40Price
£9.66Price
£9.66Price
Chrome shaft with chemically blackened tip insert. Suitable for safe removal of oil and grease seals found in automotive drives and transmissions, without damage to seal or surrounding casting. The two tips fit most popular seal sizes.
£9.66Price
Double ended 18.5/19.5mm, 80mm impact socket 1/2"Sq drive. Designed for easy removal of wheel bolts/nuts with missing or distorted caps. Suitable for Ford, GM, Jeep, Chrysler. Thin-wall design to fit a wide range of applications. Black phosphate finish.
£10.34Price
£10.37Price
Forged construction with hot forged sockets and baked finish.
£10.37Price
£10.74Price
£10.74Price
Pressure gauge with Ø46mm dial, reading up to 100psi(7kg/cm²). Metal body and offset valve connector. Compatible with both cars and light commercial vehicles.
£10.74Price