Steel jaws with PVC coated handles for added comfort. Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands specific band tensions. Suitable for all ear-type CVJ boot clips.

Suitable for suspension lower ball joints on Renault Master and Vauxhall Movano 2010 onwards. Also suitable for drive shaft hub nuts on Fiat Ducato, Citroen Jumper and Peugeot Boxer. Made from Chrome Molybdenum Steel with black phosphate finish.

Suitable for a range of Citroen, Peugeot and Toyota vehicles. Design allows the suspension joint centre to pass through. 38mm 6-point Drive.

Set of two heat treated alloy steel sockets. Suitable for removal of OEM and aftermarket lower ball joints on Citroen and Peugeot vehicles. Supplied in storage case.

Robust gauge with protective rubber bumper reading up to 8bar(120psi). Fitted with 45° angle chuck and pressure release button. Integral colour-coded tyre depth gauge.

Composite body and dial type gauge with rubber protector. Calibrated in bar and psi. Fitted with 500mm rubber hose and single clip-on connector.

Heavy-duty Chrome Vanadium construction. Long reach arms compress a higher proportion of the coil spring. Allows even and safe compression of spring prior to installation.

Carbon steel, hardened lead screws and cast jaws. Wrapover coil claws for extra safety. Suitable for use where space under wheel arch is limited.

Die-cast body and digital type gauge with rubber protector. Displayed in psi, bar, kpa and kg/cm². Supplied with hose and twin push-on connector. Pressure release valve. Auto-power-off function.

Push-on type tyre pressure gauge with easy-to-read LCD digital screen, displaying in psi with 0.5psi graduation. . Pressure release valve. Single lithium cell will run approximately 4000 test cycles. Auto-off function with low battery indication.

Chrome Molybdenum sockets, hardened, tempered and anodised for corrosion resistance. Suitable for use with impact tools. Each socket is sleeved and has an insert to prevent damage to alloy wheels and nuts. Colour-coded sockets for easier size selection. Comprises deep or long reach 17, 19 and 21mm sockets. Supplied in storage case.

Stud hub cleaning pads for Model No. VS8002.

Composite body and dial type gauge with rubber protector. Calibrated in bar/psi. Fitted with 500mm rubber hose and a twin push-on connector.

Hardened and tempered stainless steel gauge. 11mm High figures in LCD display for ease of reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows for comparative measurement. Supplied in storage case.

Set of 20 locking keys for the removal of security locking wheel nuts on Porsche vehicles. For distribution to bona fide vehicle dealers and repair centres only.

Carbon steel, hardened lead screws and cast jaws. Wrapover coil jaws for extra safety. Long reach jaws are ideal for the longer type of coil spring found on modern vehicles.

Three forks with interchangeable shafts for use with ball pein hammer or air hammer with .401" shanks (Model No's GSA11, GSA12, SA11, SA12/S, SA613, SA614). Suitable for most small cars and light commercials.

Contains the four most common wheel bolt thread sizes. Suitable for cleaning and repairing damaged wheel hub threads, saving time and money. Use with 12mm socket or spanner. Supplied in storage case.

Suitable for fast and easy removal of the steering knuckle. Fits racks with hex drive, two flats and round ends. Ideal for vehicles with limited access and avoids the need to remove the rack assembly.

Composite body and dial type jumbo gauge with rubber protector. Calibrated in bar and psi. Fitted with 400mm rubber hose and single clip-on connector.

2-Piece impact ball joint splitter with detachable fork for use with Sealey air hammer guns. Long shaft provides reach and stability when striking with hammer. Suitable for most cars and light vans.

Enables installation of CVJ boot in situ without splitting the drive train. Slim design ideal for fitting CVJ boots where access is limited. Suitable for use with all Sealey CVJ stretch boots. Length 442mm. Maximum CVJ diameter Ø122mm. Use in conjunction with Sealey VS705.

Flip socket set featuring wheel nut socket one end and fluted socket the other, for removing locking or rounded off wheel nuts. Attach the 75mm extension bar and slip on one of the double end impact tools. Simple and fast interchange, pull socket off bar, flip 180°, put it back on. High quality Chrome Molybdenum impact sockets with heat treatment and anti-corrosion finish.

Set of 12 locking keys for the removal of security locking wheel nuts on VW vehicles. For distribution to bona fide vehicle dealers and repair centres only.

Set of 10 locking keys for the removal of security splined locking wheel nuts on BMW and Mini. For distribution to bona fide vehicle dealers and repair centres only.

Robust gauge with protective rubber bumper reading up to 8bar(120psi). Fitted with 335mm armoured flexible hose and pressure release button. Integral colour-coded tyre depth gauge.

Specially designed cutter for use on Land Rover, Range Rover locking wheel nuts. To be used in conjunction with Model No. SX299 Master Locking Wheel Nut Removal Set.

Specially designed cutter for use on Jaguar locking wheel nuts. To be used in conjunction with Model No. SX299 Master Locking Wheel Nut Removal Set.

High quality Chrome Molybdenum hub impact sockets/hex bits. Specially designed for VAG vehicles. Suitable for use with 1/2"Sq drive impact tools. Supplied in storage case.

Cast iron ductile body with steel force screw and tommy bar. Suitable for four and five stud hubs. Use with a 1/2"Sq drive ratchet wrench or with tommy bar supplied.