Forged and heat treated Chrome Vanadium steel impact grade socket, chemically blackened for corrosion resistance. Malleable steel makes the socket suitable for use with either hand ratchet wrenches or air impact wrenches.

Composite body and dial type jumbo gauge with rubber protector. Displays in bar and psi. Fitted with 400mm rubber hose and twin push-on connector.

Chrome Molybdenum, drop-forged, 8-stud impact socket, designed for grooved locknut fitted to Scania (420) axle systems.

Die-cast body and digital type gauge with rubber protector. Displayed in psi, bar, kpa and kg/cm². Fitted with 500mm rubber hose and single clip-on connector. Supplied with 2 x AAA batteries.

Emergency kit includes 12V compressor, 450ml sealant bottle, accessories for inflatables, instructions and zipped storage bag fitted with hook-and-loop fastening for smart storage. Can seal a puncture up to Ø6mm at the roadside in under 10 minutes. Sealant is manufactured from natural rubber, meaning tyre can be washed out at the point of a professional repair. Very simple-to-use kit requires...

Manufactured from Chrome Vanadium Steel for added corrosion resistance. Single Hex 6pt 120mm long sockets. Extra-deep socket set which is useful for deep-seated bumper, body panel, rear lamp and door hinge fittings. Can also be used for parking brake cable adjustment on BMW, Ford, VAG and Vauxhall/Opel. Sizes: 8, 10, 12, 13, 14mm.

Quick and easy wheel stud cleaning tool. Supplied with a 1/2"Sq drive/1/4"Hex adaptor. Six brushes; 12mm(7/16"), 13mm(1/2"), 14mm(9/16"), 16mm(5/8"), 22mm(7/8") , 28mm(1-1/8"). Quick change brushes, use with cordless drill (Max. Speed 1800rpm) or by hand.

Hardened and tempered stainless steel gauge. 11mm Digits in LCD display for ease of reading. Metric and Imperial calibration with conversion between the two. Zero setting control allows for comparative measurement. Pin type tread-probe. Supplied with calibration certificate and storage case.

Chrome Molybdenum sockets, hardened, tempered and anodised for corrosion resistance. Suitable for use with impact tools. Each 6-point socket is sleeved to prevent damage to alloy wheels and nuts. Colour-coded sockets for easy size selection. Standard 17, 19, 21mm sockets and 27mm for Land Rover, Range Rover and other 4x4 applications, plus spare PE sleeves and depth inserts. Supplied in storage...

Digital inclinometer with laser line and four magnetic sides for measuring angles and tilt percentages on metal and other surfaces. Wide range of uses including setting suspension camber and caster, collision avoidance bumper mounted radar and parking assist systems. Absolute zero measure on any flat surface with accuracy ±0.2° and measuring range 4 x 90°. Large backlit LCD display makes it...

Specialist set of tools suitable for removal and adjustment of hubs, steering and suspension on selected VAG vehicles. High quality Chrome Molybdenum components suitable for use with impact tools. Supplied in storage case.

Removes surface dirt and corrosion on hubs fitted with studs. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. Cleaning discs fit over wheel studs. Use with power drill or air impact wrench. Supplied with 1/2"Sq drive adaptor. Replacement cleaning pads available, order Model No. VS8002A.

Manufactured from Chrome Vanadium Steel for added corrosion resistance. Single Hex 6pt 120mm long sockets. Extra-deep socket set which is useful for deep-seated bumper, body panel, rear lamp and door hinge fittings. Can also be used for parking brake cable adjustment on BMW, Ford, VAG and Vauxhall/Opel. Sizes: 15, 16, 17, 18, 19mm.

Compatible with many brands of tyre inflator fitted with a 1/4” BSP male connector on the end of the hose. Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA399, SA37/93, SA37/95, SA400, SA9312, SA9313, SA37/93B, SA37/96B and SA37/99.

Comprehensive set for the removal and installation of nuts on McPherson struts. Covers a large range of vehicle applications.

Forged Chrome Molybdenum steel 1/2"Sq drive sockets for removal of wheel locking nuts when the key is not available. May also be used on fixings too damaged or corroded for standard sockets. Set includes drift to aid removal of fixing from socket. Suitable for use with impact wrenches. For distribution to bona fide vehicle dealers and repair centres only.

VS705 Composite cone with steel core which enables the CV boot to be easily pushed over the CV joint in situ using VS701 without splitting the drive train. Slim design ideal for fitting CVJ boots where access is limited. CV96 Universal CVJ Boot is manufactured from high quality neoprene material. Supplied with fitting kit including clips, grease sachet and cutting guide. Suitable for most car...

Chromium plated caps fitted to some wheel nuts are prone to swelling, making them incompatible with standard whole size sockets. Half sizes allow secure fitment for safe removal. Double ended 80mm impact sockets 1/2"Sq Drive 6-point. Black phosphate finish.

Heavy-duty, high quality, 12-point, Chrome Molybdenum impact sockets suitable for use with any 1/2"Sq drive impact tool. Blackened finish for added corrosion resistance. Tool suitable for hub nut applications where high torque is required. Supplied in a storage case.

Chromium-plated caps fitted to some wheel nuts are prone to swelling, making them incompatible with standard whole-size sockets. Half sizes allow the secure fitment for safe removal. Chrome molybdenum socket is hard-wearing, tempered and anodised for corrosion resistance. Durable thin-walled design for use with impact tools. Double-ended 6-point socket is externally sleeved to prevent damage to...

Carbon steel tyre lever with hook ends. Suitable for use on commercial vehicle tyres.

Five times stronger than the conventional design and tested to 500Nm. Innovative design features a protective metal colour-coded ring that prevents the socket wall spreading. Each socket is sleeved and has an insert to prevent damage to alloy wheels and nuts.

Taps and dies are suitable for chasing out damaged threads and the removal of nicks and burrs without undercutting good threads. Use with a standard spanner and a little light oil. Thread file restores damaged external threads on any diameter, right or left-hand - just select correct pitch. Ideal for restoration work. Supplied in storage case.

Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands-free for releasing retaining circlip. Reduces risk of damage to transmission. Saves on labour time and suitable for most vehicles.

Chrome molybdenum 6-spoke socket. Designed for the grooved nut on the Mercedes-Benz Sprinter rear axle. Fits OE groove nut - Part No. A970 356 0026.

Set of 20 locking keys for the removal of security locking wheel nuts on Vauxhall-B vehicles. For distribution to bona fide vehicle dealers and repair centres only.

Carbon steel, hardened lead screws and cast jaws with safety hooks to prevent accidental release of spring under compression. Maximum load per set of three clamps 1200kg.

A must have tool for every workshop. Repairs light damage to CV joint threads. Set contains sizes to fit the most common types of vehicle. Must be used with a light oil to lubricate thread. Supplied in storage case.

Designed for use on fixings that have a high torque setting. Counter-weighted design reduces impact losses found in conventional sockets. 17, 19, 21mm Sizes cover a wide variety of crankshaft pulley bolt sizes. Suitable for GM, Ford, Honda, Kia, Toyota, Lexus, Jeep and Mazda vehicles.