Supplied with hex drive adaptor for matched balance and extractor drift. Thick wall body with multi-slot extraction and 8mm high diamond segments. High-speed drilling when used on lightweight building material such as; soft stone, facing bricks, breeze blocks and insulation blocks. (Not suitable for reinforced or non-reinforced concrete.) For dry drilling only. Supplied with integral hex shanks.

Crankshaft pulley holding wrench. Suitable for Vauxhall/Opel 1.6 diesel engines.

Used to counter-hold the crankshaft pulley when loosening/tightening the pulley bolt. Short head design for use in confined spaces and on vehicles with a single crankshaft pulley. For use with 1/2"Sq drive breaker bar.

Used to counter-hold the crankshaft pulley when loosening/tightening the retaining bolt. Suitable for most Honda vehicles fitted with hydraulic PAS. Use with 1/2"Sq drive breaker bar.

Essential tool required to counter-hold the crankshaft pulley whilst removing/tightening the crankshaft pulley bolt.

Designed to rotate crankshaft on DAF commercial vehicles via flywheel ring gear.

Designed to rotate crankshaft on Volvo commercial vehicles via flywheel ring gear.

Durable tool tray designed to fit onto the side of most steel framed creepers. Magnetic base holds smaller components in place, keeping them to hand while working under a car. Generous 'lip' hooks over most frame sizes to allow easy fitting (fixings included). Thumbscrew fixing allows easy fitting and removal of tray from creeper.

One of a range of quality accessories for Model No's SM1308 and SM1100 wood lathes. Will fit other brands of wood turning lathe.

Ø180mm TCT blade cuts slow and cold without the need for coolant fluid. Will handle steel, wood, brass, aluminium and most plastics, without the need to change blades. Even hidden nails and screws in timber are no longer a problem. Powered by a 1280W motor. Cast alloy base for added strength, while retaining portability. Featuring robust saw arm and quick action mitring vice. Fully guarded and...

Suitable for use with 6ft, 8ft, 10ft, 12ft & 14ft trampolines. Prevents trampoline from moving during use and strong winds. Spiral shape provides secure footing and round mounts are for ideal strap guiding. Kit includes four spiral steel pegs and four adjustable safety straps.

Used to preserve the memory to on-board electronics whilst vehicle's own battery is disconnected. Saves valuable time spent re-programming lost codes. Can be connected via the vehicle's EOBD or vehicle accessory power socket. Unit features an internal 12V 7Ah sealed battery and LEDs provide battery condition and charge indicator. Supplied with mains charger.

Precision mechanism with Ø50mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality. Will indicate the deviation from set size by up to 5mm with an accuracy of 0.01mm. Probe body, dial indicator, anvils and spacer rings are also included. Supplied in wooden storage case.

Precision mechanism with Ø58mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality. Will indicate the deviation from set size by up to 10mm with an accuracy of 0.01mm. Probe body, dial indicator, anvils and spacer rings are also included. Supplied in storage case.

Suitable for locking the flywheel in the timed position on Land Rovers fitted with the 300TDi engine EDC (Electronic Diesel Control) and manual transmission.

Camshaft setting and flywheel locking tools to cover BMW M47/TU/T2 and M57/TU/T2 diesel engines used in BMW, Land Rover, MG/Rover and Vauxhall/Opel models. Supplied in storage case.

Fuel filter wrench designed for Fiat, Alfa Romeo, Lancia, Vauxhall/Opel with Diesel engines. Use with a 3/8"Sq Drive torque wrench.

Heavy-duty enclosed design features four wheels, a large handle at either end and lifting eye for portability. Suitable as a backup electrical supply for your business and home. Ideal for running power tools and lighting units. Long running - up to 7.5 hours on a full tank. Fitted with one 16A 110V, one 32A 110V and one 32A 230V socket. Powerful and reliable key start generator. Features low...

Suitable for repairs on Bosch, Denso and Siemens injectors. 6.6, 7.6mm Hex security bits 20mm Hex/1/2"Sq Drive. 16mm 8-sided socket for Bosch common rail Injectors. Denso common rail injector valve seat removal tool. Injector ball valve lapping tools and guide. Manufactured from Chrome Vanadium steel and S45C. Supplied in storage case.

Essential tool for holding the flywheel when releasing and tightening the vibration damper central bolts on BMW M47T2, M57T2, M57TU, M67, N20, N26, N43, N45, N45T, N46, N46T, N47, N51, N52, N53, N54 and Mini W17 diesel/petrol chain drive engines. The tool can also be used to hold the flywheel when removing the timing chain for cylinder head work.

Ø125mm Dry stone wheel for use with Model No. SMS2107 Bench Grinder.

Specially designed shorter version (100mm) for VAG models with common rail engines and DSG gearboxes. Time-saving tool, allows filter removal without removing the battery. Longer version available - Model No. VS70097L.

Specially designed for the oil and filter change on DSG gearboxes fitted in VAG vehicles. Time-saving tool, allows filter removal without removing the battery. Shorter version available for common rail engines - Model No. VS70097S.

Alternative upgrade option on ATV/quad bike and self recovery winches. Made from synthetic fibres for improved strength and safety benefits. When using Dyneema rope, the 4-way fairlead roller must be changed to an aluminium hawse fairlead (see below). See specification chart for correct model number to suit your winch.