For adjusting the adaptive cruise control (ACC) RADAR unit. Equivalent to VAG tool VAS6190/2. Manufactured from Chrome Vanadium with satin finish.

Suitable for cleaning corrosion and carbon build-up from spark plug threads. Also possible to restore minor cross threading damage. Designed for deep-seated plugs where a slim profile drive is necessary to fit down into the head. Features shank above threads for recessed threads.

Suitable for cleaning and repairing damaged threads on the exhaust oxygen sensor port. Use with 21mm socket.

Suitable for cleaning corrosion and carbon build-up from spark plug threads. Also possible to restore minor cross threading damage. Use with a 21mm spark plug socket.

Suitable for vehicles with discs all round. Retracts parking brake piston prior to installation of new pads. Five possible pin configurations fit US and European applications. Use with 3/8"Sq drive ratchet wrench and extension bar. Warning: Not for use with impact type ratchets.

Flexible plastic covered wire with attachment loop. For guiding/pulling replacement automotive wiring into position through confined spaces. Suitable for use with insertion tools.

Die-cast cutter body with heavy-duty HSS hardened cutting wheel. Smooth screw action for clean cutting performance.

Designed to hold the central strut whilst the securing nut is removed. WARNING: Ensure the road spring has been compressed using a suitable spring compressor BEFORE removing top nut. Applications: Volvo C70 Coupe (-02), C70 Convertible (-05), S70, V70 (-00), XC90, V70 (00-08), V70 XC (01-), XC70 (-07), S60, 850, V70 XC (-00), S80 (-06). OEM Tools: 9995469 and 9995468.

Cylinder hone stone set - Fine 3 x 1-1/8". Application: VS022.

Cylinder hone stone set - Medium 3 x 1-1/8". Application: VS022.

Suitable for belt tensioning 1.8 and 1.8 Turbo twin camshaft engines. These belt drive engines also have a chain connecting the two camshafts. Includes a belt tensioner bolt, belt tensioner pin and chain tensioner retainer.

Heavy-duty zinc S-shaped hooks. Rope length 2m. Rope thickness Ø1/8". Convenient thumb lever pulley ratchet system. For hanging parts such as calipers and exhausts without the need for removing components. Can also be used to tie down general items in the workshop or at home. Breaking strength 35kg.

Designed to aid installation and removal of large and small T-slot anti-rattle washers found in drum brake assembly. Features large viewing cut-away to allow correct alignment of washer. Simple push and twist action.

Purpose-made for the installation and removal of drum shoe return springs. Can also be used for removal/installation of spring from anchor stud. Suitable for most car and light commercial drum brakes.

Suitable for the removal and installation of top shock retaining nut. Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock. Use with 22mm spanner.

Magnetic spark plug sockets. Forged Chrome Vanadium steel, hardened, tempered and chrome plated.

Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 20 or 24mm lock nuts.

Adjustable 2-pin brake wind-back adaptor suits a wide range of vehicle applications. 2-Pin drive compatible with Model No's VS0282, VS0285, VS0287, VS0286 and VS0211.

Multiple uses can be used as a scraper for removing decals and can also be used to pry open delicate materials. Non-marring trim set that can be used to dismantle and install dashboards, vents, door panels, door locks, and audio and electronic installations without causing damage to paintwork. Colour-coded, green tools are used for car interior trims, and black tools are for car exterior trims....

Cap type oil filter wrench. 3/8"Sq drive for use with torque wrenches. Designed for use on Jaguars and Land Rovers. Applications: Jaguar; XF, XJ (10-17), XFR, XJL, XK, XKR (10-16), Land Rover LR4, Range Rover, Range Rover Sport (10-17). Not suitable for impact use.

Cap type oil filter wrench. 3/8"Sq drive for use with torque wrenches. Designed for use on Mercedes Sprinter vans with 3L petrol and diesel engines. Also fits Mercedes C Class V 3.0, R320 CDI, ML320 CDI SUVs. Not suitable for impact use.

Suitable for cleaning and repairing damaged threads on the exhaust oxygen sensor port. Use with 21mm socket.

Ideal for removing interior trim, vents and battery replacement on key fobs. Slim profile and manufactured from resilient nylon to minimize panel damage and marking.

4-Tooth socket, specially designed to remove castellated locknuts found on motorcycle swingarms. Also suitable for some engine mounting nuts.